2001 Chevrolet Silverado 1500 Brake Job Torque Specs

Compare 12 named brake fastener records for 2001 Chevrolet Silverado 1500. These records are not a universal caliper mounting or bracket torque answer. Verify the exact part, axle, variant and source against the service manual. Full bolt records for the rest of the vehicle are linked below.

Caliper Mounting Bolts records — 2001 Chevrolet Silverado 1500

Recorded fastener names and fields for 2001 Chevrolet Silverado 1500: Brake Caliper Mounting Bolt (torques to 129 ft-lbs (175 Nm), 18mm socket, M12x1.75 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

Caliper Bracket Bolts records — 2001 Chevrolet Silverado 1500

Recorded fastener names and fields for 2001 Chevrolet Silverado 1500: Front Brake Caliper Bracket (Anchor Plate) Bolts (torques to 129 ft-lbs (175 Nm), 18mm socket, M14x1.5 or M16x1.5 (18 mm hex head) thread); Rear Brake Caliper Bracket Bolts (disc brake trucks) (torques to 148 ft-lbs (Gen3 K2XX 2014 confirmed by TRQ repair video), 18 mm socket, M16x1.5 (18 mm hex) thread); Brake Caliper Bracket Bolt (torques to 129 ft-lbs (175 Nm), 18mm socket, M14x2.0 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

Caliper Slide / Guide Pins records — 2001 Chevrolet Silverado 1500

Recorded fastener names and fields for 2001 Chevrolet Silverado 1500: Front Caliper Slide Pin Bolts (torques to 26 ft-lbs (35 Nm), 18mm socket, M12x1.75 (pin bolt) thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

Rotor Retaining Hardware records — 2001 Chevrolet Silverado 1500

Recorded fastener names and fields for 2001 Chevrolet Silverado 1500: Brake Rotor Set Screw (torques to 35 lb-in, 10mm socket, M8 x 1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

Hydraulic (Banjo & Bleeder) records — 2001 Chevrolet Silverado 1500

Recorded fastener names and fields for 2001 Chevrolet Silverado 1500: Brake Line Banjo Bolt (torques to 30 lb-ft, 12mm socket, M10 x 1.0 thread); Brake Hose Bracket Bolt (torques to 15 lb-ft, 10mm socket, M8 x 1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

Parking-Brake Hardware records — 2001 Chevrolet Silverado 1500

Recorded fastener names and fields for 2001 Chevrolet Silverado 1500: Parking Brake Cable Bolt (torques to 18 lb-ft, 13mm socket, M8 x 1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

Other Brake Fasteners records — 2001 Chevrolet Silverado 1500

Recorded fastener names and fields for 2001 Chevrolet Silverado 1500: ABS Wheel Speed Sensor Bolt (Front) (torques to 115 in-lbs (9.6 ft-lbs) — Gen1 GMT800 (1999-2006 per TRQ video); 13 ft-lbs — Gen2 GMT900 (2007-2013 per Merchant Auto FSM), 3/16 Allen head thread); Rear Drum Brake Wheel Cylinder Bolts (torques to 11-17 ft-lbs (typical GM range for wheel cylinder mounting bolts), 13 mm socket, M8x1.25 thread); Brake Master Cylinder Mounting Nut (torques to 20 lb-ft, 13mm socket, M10 x 1.5 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

How to do a Silverado 1500 brake job right

Consult the service manual for the exact axle and variant before starting. Identify the mounting bolts, bracket bolts and slide/guide pins separately. Bolt reuse, lubrication, threadlocker and torque-to-yield requirements are application-specific, not universal rules for a display group. Support the caliper safely without loading the hose, and use the specified tightening sequence with a calibrated torque wrench rather than an impact tool.

Tools you need for a Silverado 1500 brake job

Recorded socket sizes for 2001 Chevrolet Silverado 1500: 13 mm, 18mm, 18 mm, 12mm, 13mm, 10mm. Other tools may include a caliper slide-pin tool or hex/Torx bit set, a torque wrench that covers the specified torque values, plus thread-locker or brake lubricant only where the manual calls for it. A caliper piston compressor makes seating the new pads far easier. See the recommended tools and replacement hardware linked below.

Related lookups

Loading interactive lookup…