2009 Ford Escape Brake Job Torque Specs

Compare 8 named brake fastener records for 2009 Ford Escape. These records are not a universal caliper mounting or bracket torque answer. Verify the exact part, axle, variant and source against the service manual. Full bolt records for the rest of the vehicle are linked below.

Caliper Bracket Bolts records — 2009 Ford Escape

Recorded fastener names and fields for 2009 Ford Escape: Rear Caliper Bracket Bolts (All) (torques to 46 ft-lbs (63 Nm), 13mm socket, M10 thread); Front Caliper Bracket Bolts (All) (torques to 100 ft-lbs (136 Nm) [2007-2012: 129 ft-lbs / 175 Nm per TorkSpec], 18mm socket, M12x1.5 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

Caliper Slide / Guide Pins records — 2009 Ford Escape

Recorded fastener names and fields for 2009 Ford Escape: Front Caliper Slide Pin Bolts (All) (torques to 24-37 ft-lbs (33-50 Nm) [2008-2009: 37 ft-lbs; 2010-2012: 18 ft-lbs per TorkSpec — verify with OEM manual], 9mm hex (2008-2009) or 7mm hex (2010-2012) socket, M8 thread); Rear Caliper Slide Pin Bolts (All) (torques to 21 ft-lbs (28 Nm), 7mm hex socket, M8 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

Rotor Retaining Hardware records — 2009 Ford Escape

Recorded fastener names and fields for 2009 Ford Escape: Rotor Retaining Screw (All) (torques to 10-15 in-lbs (1-2 Nm), T20 Torx socket, M5 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

Hydraulic (Banjo & Bleeder) records — 2009 Ford Escape

Recorded fastener names and fields for 2009 Ford Escape: Brake Hose Banjo Bolt (All) (torques to 26–34 ft-lb (35–46 Nm), 17mm socket, M10x1.0 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

Other Brake Fasteners records — 2009 Ford Escape

Recorded fastener names and fields for 2009 Ford Escape: Wheel Speed Sensor Bolt (All) (torques to 84 in-lb (9.5 Nm), 8mm socket, M6x1.0 thread); Brake Caliper Bolt (torques to 22-25 ft-lbs, 13mm socket, M8x1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

How to do a Escape brake job right

Consult the service manual for the exact axle and variant before starting. Identify the mounting bolts, bracket bolts and slide/guide pins separately. Bolt reuse, lubrication, threadlocker and torque-to-yield requirements are application-specific, not universal rules for a display group. Support the caliper safely without loading the hose, and use the specified tightening sequence with a calibrated torque wrench rather than an impact tool.

Tools you need for a Escape brake job

Recorded socket sizes for 2009 Ford Escape: 13mm, 9mm hex (2008-2009) or 7mm hex (2010-2012), 8mm, 18mm, T20 Torx, 17mm. Other tools may include a caliper slide-pin tool or hex/Torx bit set, a torque wrench that covers the specified torque values, plus thread-locker or brake lubricant only where the manual calls for it. A caliper piston compressor makes seating the new pads far easier. See the recommended tools and replacement hardware linked below.

Related lookups

Loading interactive lookup…