2016 Honda HR-V Bolt Sizes & Torque Specs

Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.

This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2016 Honda HR-V. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

Honda and Acura platforms often reuse lug-thread conventions across related models, but the socket and torque must come from this vehicle's own record. Do not substitute a common import socket size for a measured lug nut.

Common fastener categories on the 2016 Honda HR-V

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
Transmission pan, valve cover, and intake manifold bolts where the database has exact records
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque only when a vehicle-specific spark-plug row is available
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2016 model-year work: This era introduced widespread torque-to-yield (TTY) bolts on head, main, and crank pulley fasteners. TTY bolts stretch permanently when torqued and must not be reused — the spec calls for a fresh bolt every time. Always verify TTY status against the FSM before reassembly.

Tools you will need

Metric socket set (8mm-22mm), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them

Frequently asked questions

What is the lug nut torque on a 2016 Honda HR-V?

Specification not verified for this lug nut summary. Do not substitute another model year's value.

What socket size do I need for the 2016 Honda HR-V lug nuts?

Confirm the socket against the actual lug nut; no size is assumed here.

Are the 2016 Honda HR-V fasteners metric or SAE?

Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.

Other Honda HR-V years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

All 5 2016 Honda HR-V fastener specs

Per-field evidence and legacy records for the 2016 Honda HR-V. A verified torque does not verify socket size, thread or part number. Unverified records are not installation instructions; conflicting specifications are withheld.

Brakes — 2016 Honda HR-V

Brake fasteners on the 2016 Honda HR-V — caliper bracket, slide pins, and banjo bolt torque follow. Front Caliper Bracket Bolt (Front brake caliper bracket). Torque: 53 ft-lbs (72 Nm) (legacy record, unverified). Socket size: 14mm (legacy record, unverified). Thread: M10x1.25 (legacy record, unverified). Part number: not verified. Front Caliper Slide Pin Bolt (Front brake caliper slide pins). Torque: 18 ft-lbs (25 Nm) (legacy record, unverified). Socket size: 12mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified.

Engine — 2016 Honda HR-V

Engine bolt-by-bolt torque for the 2016 Honda HR-V, including the long block, valve covers, and intake. Oil Drain Plug (Oil pan). Torque: 29 ft-lbs (39 Nm) (legacy record, unverified). Socket size: 17mm (legacy record, unverified). Thread: M14x1.5 (legacy record, unverified). Part number: 90009-R70-A00 (legacy record, unverified).

Wheels & Tires — 2016 Honda HR-V

Wheels & Tires fasteners on the 2016 Honda HR-V. Lug Nut (All wheels). Torque: 80 ft-lbs (108 Nm) (legacy record, unverified). Socket size: 19mm (legacy record, unverified). Thread: M12x1.5 (legacy record, unverified). Part number: 90304-SA5-013 (legacy record, unverified).

Ignition — 2016 Honda HR-V

Ignition fasteners on the 2016 Honda HR-V. Spark Plug (Cylinder head). Torque: 13 ft-lbs (18 Nm) (legacy record, unverified). Socket size: 5/8 in. (legacy record, unverified). Thread: M14x1.25 (legacy record, unverified). Part number: not verified.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2016 Honda HR-V numbers above.

Loading the interactive 2016 Honda HR-V fastener lookup with per-bolt filtering, part links, and torque tools…