2006–2009 Honda Ridgeline Bolt Sizes & Torque Specs
Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.
This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2009 Honda Ridgeline. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.
These specifications also apply to the 2006, 2007 and 2008 model years — identical specs on file for each year.
Honda and Acura platforms often reuse lug-thread conventions across related models, but the socket and torque must come from this vehicle's own record. Do not substitute a common import socket size for a measured lug nut.
Common fastener categories on the 2009 Honda Ridgeline
- Wheel / lug nut torque and thread spec (covered above)
- Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
- Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
- Transmission pan, valve cover, and intake manifold bolts where the database has exact records
- Suspension control arm, sway bar, tie rod end and ball joint torque
- Spark plug torque only when a vehicle-specific spark-plug row is available
- Differential cover bolts (RWD/4WD only) and transfer case fasteners
Repair guidance for this model year
For 2009 model-year work: Always use a calibrated torque wrench for safety-critical fasteners, and replace lock washers and crush washers on every reassembly.
Tools you will need
- Metric socket set (8mm-22mm), 6-point impact-rated
- Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
- Breaker bar (24" minimum) for initial loosening
- Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
- Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them
Frequently asked questions
What is the lug nut torque on a 2009 Honda Ridgeline?
Specification not verified for this lug nut summary. Do not substitute another model year's value.
What socket size do I need for the 2009 Honda Ridgeline lug nuts?
Confirm the socket against the actual lug nut; no size is assumed here.
Are the 2009 Honda Ridgeline fasteners metric or SAE?
Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.
Other Honda Ridgeline years
Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.
- 2022 Honda Ridgeline lug nut torque
- 2021 Honda Ridgeline lug nut torque
- 2020 Honda Ridgeline lug nut torque
- 2019 Honda Ridgeline lug nut torque
- 2018 Honda Ridgeline lug nut torque
- 2017 Honda Ridgeline lug nut torque
- 2016 Honda Ridgeline lug nut torque
- 2015 Honda Ridgeline lug nut torque
- 2014 Honda Ridgeline lug nut torque
- 2013 Honda Ridgeline lug nut torque
- 2012 Honda Ridgeline lug nut torque
- 2011 Honda Ridgeline lug nut torque
- 2010 Honda Ridgeline lug nut torque
- 2008 Honda Ridgeline lug nut torque
- 2007 Honda Ridgeline lug nut torque
- 2006 Honda Ridgeline lug nut torque
All 2 2009 Honda Ridgeline fastener specs
Per-field evidence and legacy records for the 2009 Honda Ridgeline. A verified torque does not verify socket size, thread or part number. Unverified records are not installation instructions; conflicting specifications are withheld. 1 of the 2 records carry legacy review labels (last reviewed June 2026); those labels do not verify individual fields.
Wheels — 2009 Honda Ridgeline
Wheel and lug nut spec for the 2009 Honda Ridgeline. Lug Nut (All wheels). Torque: 94 ft-lbs (127 Nm) (legacy record, unverified). Socket size: not verified. Thread: M12x1.5 (legacy record, unverified). Part number: 90304-SA5-013 (legacy record, unverified).
Engine — 2009 Honda Ridgeline
Engine bolt-by-bolt torque for the 2009 Honda Ridgeline, including the long block, valve covers, and intake. Oil Drain Plug (Oil pan). Torque: 29 ft-lbs (39 Nm) (legacy record, unverified). Socket size: not verified. Thread: M14x1.5 (legacy record, unverified). Part number: 90009-R70-A00 (legacy record, unverified).
New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2009 Honda Ridgeline numbers above.
Loading the interactive 2009 Honda Ridgeline fastener lookup with per-bolt filtering, part links, and torque tools…