2023 Toyota Landcruiser 300 Bolt Sizes & Torque Specs
Free OEM-referenced torque and bolt specs for the 2023 Toyota Landcruiser 300.
This page is the OEM-referenced fastener summary for the 2023 Toyota Landcruiser 300. Use it before any maintenance or repair job where torque values matter — brake work, wheel changes, suspension service, engine teardowns, or oil changes. Specs are pulled from manufacturer service literature, cross-checked against community data, and updated as new chassis variants become available.
Toyota's engineering standard for wheel torque is unusually consistent across the lineup — nearly every passenger Toyota from the mid-2000s onward specs 76 ft-lbs (103 Nm) for the lug nuts with an M12x1.5 thread and 21mm socket. The big exceptions are the Tundra and Sequoia full-size trucks (97-110 ft-lbs), and the lug studs on older Camrys and Corollas (pre-2002) used a smaller M12x1.25 thread that does not interchange. Always confirm by checking the alloy stamp on the wheel hub if you are unsure.
Common fastener categories on the 2023 Toyota Landcruiser 300
- Wheel / lug nut torque and thread spec (covered above)
- Brake caliper bracket bolts (typically 80-130 ft-lbs) and slide/guide pins (18-35 ft-lbs)
- Engine oil drain plug torque — rarely above 30 ft-lbs; always use a new crush washer
- Transmission pan, valve cover, and intake manifold bolts (low torque, often 89-106 in-lbs)
- Suspension control arm, sway bar, tie rod end and ball joint torque
- Spark plug torque (typically 10-15 ft-lbs on aluminum heads — do not exceed)
- Differential cover bolts (RWD/4WD only) and transfer case fasteners
Repair guidance for this model year
For 2023 late-model work: Modern vehicles increasingly use aluminum body and suspension components. Aluminum fastener torque is typically 60-70% of equivalent steel torque, and aluminum threads strip easily. Use a calibrated torque wrench and apply anti-seize on any steel fastener threading into aluminum.
Tools you will need
- Metric socket set (8mm-22mm), 6-point impact-rated
- Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
- Breaker bar (24" minimum) for initial loosening
- Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
- Anti-seize on stainless or dissimilar-metal threads; thread-locker (Loctite blue) on critical reassembly
Frequently asked questions
What is the lug nut torque on a 2023 Toyota Landcruiser 300?
Manufacturer-specified torque values for the 2023 Toyota Landcruiser 300 are in the factory service manual or owner's handbook. WhatSizeBolt sources values from manufacturer literature and verifies against community data — if we do not have this exact year listed, check the Toyota brand page for the closest model year.
What socket size do I need for the 2023 Toyota Landcruiser 300 lug nuts?
Most modern Toyota vehicles use a 19mm or 21mm socket. Older Toyota models from before 2000 may use a 13/16" SAE socket on certain trims. Confirm against the actual lug before purchasing aftermarket wheels.
Are the 2023 Toyota Landcruiser 300 fasteners metric or SAE?
Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.
→ 2023 Toyota Landcruiser 300 oil drain plug torque & size
All 5 2023 Toyota Landcruiser 300 fastener specs
Per-bolt torque, wrench size, and thread spec for the 2023 Toyota Landcruiser 300, sourced from OEM service literature and verified against community shop data. Values pair imperial (ft-lb) and metric (Nm) where the manufacturer publishes both.
Wheels — 2023 Toyota Landcruiser 300
Wheel and lug nut spec for the 2023 Toyota Landcruiser 300. The wheel nut (alloy wheels) uses a 21mm drive on a M12x1.5 thread, torqued to 80 ft-lbs (108 Nm) at the all four wheels — alloy wheel spec. At the all four wheels — steel/spare wheel spec, the wheel nut (steel wheels) torques to 80 ft-lbs (108 Nm) (21mm drive, M12x1.5 thread).
Brakes — 2023 Toyota Landcruiser 300
Brake fasteners on the 2023 Toyota Landcruiser 300 — caliper bracket, slide pins, and banjo bolt torque follow. At the front caliper bracket to knuckle, 2 bolts per side, the front brake caliper bracket bolt torques to 123 Nm (90 ft-lb) (22mm drive, M14x1.5 thread).
Engine — 2023 Toyota Landcruiser 300
Engine bolt-by-bolt torque for the 2023 Toyota Landcruiser 300, including the long block, valve covers, and intake. For the bottom of oil pan — f33a-ftv diesel, plan for a 14mm tool on a M14x1.5 stud; final torque is 40 Nm (30 ft-lb) (oil drain plug).
Drivetrain — 2023 Toyota Landcruiser 300
Drivetrain and driveline fasteners for the 2023 Toyota Landcruiser 300 — axle, transmission, and differential plugs. Front axle / hub nut (4wd) tightens to 274 Nm (202 ft-lb), takes a 35mm driver, runs on M30x1.5 threads, located at the centre of front hub.
New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2023 Toyota Landcruiser 300 numbers above.
Loading the interactive 2023 Toyota Landcruiser 300 fastener lookup with per-bolt filtering, part links, and torque tools…