2015 Ford Expedition Axle Nut Torque Spec

Axle and hub nut torque values from our fastener database for the 2 axle and hub nut entries on the 2015 Ford Expedition — including the Front Halfshaft Axle Nut (torques to 20 ft-lbs (27 Nm)). Confirm every value in your factory service manual before reassembly. The axle nut retains the CV axle in the hub and on many designs sets the wheel bearing preload, so the exact torque matters. Full bolt specs for the rest of the vehicle are linked below.

Front Axle / Hub Nut torque — 2015 Ford Expedition

Our fastener database lists these front axle / hub nut values for the 2015 Ford Expedition: Front Halfshaft Axle Nut (torques to 20 ft-lbs (27 Nm)). Axle nuts are safety-critical — staked and crimp-collar nuts are single-use on many models, so fit a new nut where the manufacturer requires it and verify the value against your factory service manual before reassembly.

Rear Axle / Hub Nut torque — 2015 Ford Expedition

Our fastener database lists these rear axle / hub nut values for the 2015 Ford Expedition: Rear Halfshaft Axle Nut (torques to 184 ft-lbs (250 Nm) — use new original-equipment nut (SKF [52])). Axle nuts are safety-critical — staked and crimp-collar nuts are single-use on many models, so fit a new nut where the manufacturer requires it and verify the value against your factory service manual before reassembly.

How to torque the Expedition axle nut correctly

Remove the cotter pin or unstake the old nut with a punch before loosening — never zip a staked nut out through the stake. Break the nut loose with the wheel on the ground (or have a helper hold the brakes) using a breaker bar. On reassembly, seat the CV axle fully, thread the new nut by hand, and bring it to the final spec with a calibrated torque wrench — an impact gun overshoots the spec and can damage the wheel bearing. Stake the collar into the spindle groove (or fit a new cotter pin / cage) once torqued. An under-torqued axle nut lets the bearing run loose and fail; an over-torqued one destroys the bearing preload.

Related lookups

Loading interactive lookup…