2021 Toyota RAV4 Axle Nut Torque Spec
Axle and hub nut torque values from our fastener database for the 8 axle and hub nut entries on the 2021 Toyota RAV4 — including the Front Axle Hub Nut (Front Drive Axle Nut) (torques to 217 ft-lbs (294 Nm), M30x1.5 thread). Confirm every value in your factory service manual before reassembly. The axle nut retains the CV axle in the hub and on many designs sets the wheel bearing preload, so the exact torque matters. Full bolt specs for the rest of the vehicle are linked below.
Front Axle / Hub Nut torque — 2021 Toyota RAV4
Our fastener database lists these front axle / hub nut values for the 2021 Toyota RAV4: Front Axle Hub Nut (Front Drive Axle Nut) (torques to 217 ft-lbs (294 Nm), M30x1.5 thread); Front Axle Shaft Nut (CV Axle Nut) (torques to 294 Nm (217 ft-lbs), M30x1.5 thread); Front Axle Shaft Nut (Front CV Axle) (torques to 294 Nm (217 ft-lbs), M26x1.5 thread); Front Axle Hub Bolts (Hub to Knuckle) (torques to 120 Nm (89 ft-lbs), M12x1.25 thread). Axle nuts are safety-critical — staked and crimp-collar nuts are single-use on many models, so fit a new nut where the manufacturer requires it and verify the value against your factory service manual before reassembly.
Rear Axle / Hub Nut torque — 2021 Toyota RAV4
Our fastener database lists these rear axle / hub nut values for the 2021 Toyota RAV4: Rear Axle Shaft Nut (E-Four Drive Axle) (torques to 216 Nm (159 ft-lbs), M27x1.5 thread); Rear Shock Absorber Lower Nut (to Rear Axle Carrier) (torques to 125 Nm (92 ft-lbs), M14x1.5 thread); Rear Axle Hub Bolts (Hub to Carrier — FWD/AWD) (torques to 90 Nm (66 ft-lbs), M12x1.25 thread); Rear Axle Shaft Nut (Rear CV Axle — AWD) (torques to 216 Nm (159 ft-lbs), M26x1.5 thread). Axle nuts are safety-critical — staked and crimp-collar nuts are single-use on many models, so fit a new nut where the manufacturer requires it and verify the value against your factory service manual before reassembly.
How to torque the RAV4 axle nut correctly
Remove the cotter pin or unstake the old nut with a punch before loosening — never zip a staked nut out through the stake. Break the nut loose with the wheel on the ground (or have a helper hold the brakes) using a breaker bar. On reassembly, seat the CV axle fully, thread the new nut by hand, and bring it to the final spec with a calibrated torque wrench — an impact gun overshoots the spec and can damage the wheel bearing. Stake the collar into the spindle groove (or fit a new cotter pin / cage) once torqued. An under-torqued axle nut lets the bearing run loose and fail; an over-torqued one destroys the bearing preload.
Related lookups
- 2021 Toyota RAV4 — Full Bolt & Torque Specs
- 2021 Toyota RAV4 Suspension & Steering Torque
- 2021 Toyota RAV4 Lug Nut Torque
- Axle Nut Torque Specs Chart (All Vehicles)
Loading interactive lookup…