2002 Toyota RAV4 Brake Job Torque Specs
Compare 13 named brake fastener records for 2002 Toyota RAV4. These records are not a universal caliper mounting or bracket torque answer. Verify the exact part, axle, variant and source against the service manual. Full bolt records for the rest of the vehicle are linked below.
Caliper Bracket Bolts records — 2002 Toyota RAV4
Recorded fastener names and fields for 2002 Toyota RAV4: Rear Caliper Bracket (Cylinder Mounting) to Axle Carrier Bolt (torques to 88 Nm (65 ft-lbs), 17mm socket, M12x1.25 thread); Front Caliper Bracket (Cylinder Mounting) to Steering Knuckle Bolt (torques to 98 Nm (72 ft-lbs), 17mm socket, M12x1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Caliper Slide / Guide Pins records — 2002 Toyota RAV4
Recorded fastener names and fields for 2002 Toyota RAV4: Front Caliper Guide Pin Bolt (Cylinder to Cylinder Mounting) (torques to 34.3 Nm (25 ft-lbs), 14mm (hold guide pin with wrench) socket, M8x1.25 thread); Rear Caliper Guide Pin Bolt (torques to 26.5 Nm (20 ft-lbs), 14mm socket, M8x1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Hydraulic (Banjo & Bleeder) records — 2002 Toyota RAV4
Recorded fastener names and fields for 2002 Toyota RAV4: Front Brake Flexible Hose Banjo Bolt (torques to 29.4 Nm (22 ft-lbs), 17mm socket, M10x1.0 thread); Front Brake Bleeder Screw (torques to 8.3 Nm (73 in-lbs), 8mm socket, M8x1.0 thread); Rear Brake Flexible Hose Banjo Bolt (torques to 30.4 Nm (22 ft-lbs), 17mm socket, M10x1.0 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Parking-Brake Hardware records — 2002 Toyota RAV4
Recorded fastener names and fields for 2002 Toyota RAV4: Parking Brake Lever to Body Bolt (torques to 14.5 Nm (11 ft-lbs), 12mm socket, M8x1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Other Brake Fasteners records — 2002 Toyota RAV4
Recorded fastener names and fields for 2002 Toyota RAV4: Brake Master Cylinder to Brake Booster Nut (torques to 12.5 Nm (9 ft-lbs), 12mm socket, M8x1.25 thread); Front ABS Speed Sensor Bolt (torques to 8.5 Nm (75 in-lbs), 10mm socket, M6x1.0 thread); Rear ABS Speed Sensor Bolt (torques to 8.5 Nm (75 in-lbs), 10mm socket, M6x1.0 thread); Brake Tube to Master Cylinder Nut (torques to 15.2 Nm (11 ft-lbs), 11mm Flare Nut Wrench socket, M10x1.0 thread); Rear Hub and Bearing Assembly to Axle Carrier Bolt (torques to 90 Nm (66 ft-lbs), 17mm socket, M12x1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
How to do a RAV4 brake job right
Consult the service manual for the exact axle and variant before starting. Identify the mounting bolts, bracket bolts and slide/guide pins separately. Bolt reuse, lubrication, threadlocker and torque-to-yield requirements are application-specific, not universal rules for a display group. Support the caliper safely without loading the hose, and use the specified tightening sequence with a calibrated torque wrench rather than an impact tool.
Tools you need for a RAV4 brake job
Recorded socket sizes for 2002 Toyota RAV4: 12mm, 10mm, 14mm (hold guide pin with wrench), 17mm, 14mm, 11mm Flare Nut Wrench. Other tools may include a caliper slide-pin tool or hex/Torx bit set, a torque wrench that covers the specified torque values, plus thread-locker or brake lubricant only where the manual calls for it. A caliper piston compressor makes seating the new pads far easier. See the recommended tools and replacement hardware linked below.
Related lookups
- 2002 Toyota RAV4 — Full Bolt & Torque Specs
- 2002 Toyota RAV4 Suspension & Steering Torque
- 2002 Toyota RAV4 Lug Nut Torque
- Standard Torque Specs by Grade
Loading interactive lookup…