2019 Toyota Camry Brake Job Torque Specs
Compare 4 named brake fastener records for 2019 Toyota Camry. These records are not a universal caliper mounting or bracket torque answer. Verify the exact part, axle, variant and source against the service manual. Full bolt records for the rest of the vehicle are linked below.
Caliper Bracket Bolts records — 2019 Toyota Camry
Recorded fastener names and fields for 2019 Toyota Camry: Front Caliper Bracket Bolt (torques to 79 ft-lbs (107 Nm)). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Caliper Slide / Guide Pins records — 2019 Toyota Camry
Recorded fastener names and fields for 2019 Toyota Camry: Front Caliper Guide Pin (torques to 25 ft-lbs (34 Nm)). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Rotor Retaining Hardware records — 2019 Toyota Camry
Recorded fastener names and fields for 2019 Toyota Camry: Brake Rotor Set Screw (torques to 4 ft-lbs, 5mm socket, M5x0.8 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Hydraulic (Banjo & Bleeder) records — 2019 Toyota Camry
Recorded fastener names and fields for 2019 Toyota Camry: Brake Line Banjo Bolt (torques to 25 ft-lbs, 10mm socket, M10x1.0 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
How to do a Camry brake job right
Consult the service manual for the exact axle and variant before starting. Identify the mounting bolts, bracket bolts and slide/guide pins separately. Bolt reuse, lubrication, threadlocker and torque-to-yield requirements are application-specific, not universal rules for a display group. Support the caliper safely without loading the hose, and use the specified tightening sequence with a calibrated torque wrench rather than an impact tool.
Tools you need for a Camry brake job
Recorded socket sizes for 2019 Toyota Camry: 10mm, 5mm. Other tools may include a caliper slide-pin tool or hex/Torx bit set, a torque wrench that covers the specified torque values, plus thread-locker or brake lubricant only where the manual calls for it. A caliper piston compressor makes seating the new pads far easier. See the recommended tools and replacement hardware linked below.
Related lookups
- 2019 Toyota Camry — Full Bolt & Torque Specs
- 2019 Toyota Camry Suspension & Steering Torque
- 2019 Toyota Camry Lug Nut Torque
- Standard Torque Specs by Grade
Loading interactive lookup…