2021 Toyota RAV4 Brake Job Torque Specs
Compare 20 named brake fastener records for 2021 Toyota RAV4. These records are not a universal caliper mounting or bracket torque answer. Verify the exact part, axle, variant and source against the service manual. Full bolt records for the rest of the vehicle are linked below.
Caliper Bracket Bolts records — 2021 Toyota RAV4
Recorded fastener names and fields for 2021 Toyota RAV4: Front Brake Caliper Bracket Bolt (Steel Knuckle) (torques to 107 Nm (79 ft-lbs), 17mm socket, M12x1.25 thread); Front Brake Caliper Bracket Bolt (Aluminum Knuckle) (torques to 150 Nm (111 ft-lbs), 17mm socket, M12x1.25 thread); Rear Brake Caliper Bracket Bolt (torques to 88 Nm (65 ft-lbs), 17mm socket, M10x1.25 thread); Front Brake Caliper Bracket Bolts (to Steering Knuckle) (torques to 107 Nm (79 ft-lbs) steel knuckle; 150 Nm (111 ft-lbs) aluminum knuckle, 17mm socket, M12x1.25 thread); Rear Brake Caliper Bracket Bolts (17mm socket, M12x1.25 thread); Front Brake Caliper Bracket Bolts (Aluminum Knuckle) (torques to 150 Nm (111 ft-lbs), 17mm socket, M12x1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Caliper Slide / Guide Pins records — 2021 Toyota RAV4
Recorded fastener names and fields for 2021 Toyota RAV4: Front Brake Caliper Guide Pin Bolt (torques to 34 Nm (25 ft-lbs), 14mm socket, M8x1.25 thread); Rear Brake Caliper Guide Pin Bolt (torques to 27 Nm (20 ft-lbs), 12mm socket, M8x1.25 thread); Rear Brake Caliper Guide Pin Bolts (torques to 27 Nm (20 ft-lbs), 14mm (hold pin with hex) socket, M10x1.25 thread); Front Brake Caliper Guide Pin Bolts (torques to 34 Nm (25 ft-lbs), 14mm (hold guide pin with 17mm or hold with wrench) socket, M10x1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Hydraulic (Banjo & Bleeder) records — 2021 Toyota RAV4
Recorded fastener names and fields for 2021 Toyota RAV4: Brake Bleeder Screw (torques to 8 Nm (6 ft-lbs), 11mm socket, M7x1.0 thread); Brake Line Union Nut (Brake Pipe Fitting) (torques to 15 Nm (11 ft-lbs), 12mm Brake Line Wrench socket, M10x1.0 thread); Front ABS Speed Sensor / Brake Hose Bracket Bolt (to Strut) (torques to 29 Nm (21 ft-lbs), 12mm socket, M8x1.25 thread); Brake Flexible Hose to Caliper Banjo Bolt (Front) (torques to 29 Nm (21 ft-lbs), 17mm socket, M10x1.25 banjo thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Parking-Brake Hardware records — 2021 Toyota RAV4
Recorded fastener names and fields for 2021 Toyota RAV4: Rear No. 2 Parking Brake Wire Nut (to Trailing Arm) (torques to 15.5 Nm (11 ft-lbs), 12mm socket, M8x1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Other Brake Fasteners records — 2021 Toyota RAV4
Recorded fastener names and fields for 2021 Toyota RAV4: ABS Wheel Speed Sensor Bolt (Front) (torques to 8 Nm (71 in-lbs), 10mm socket, M6x1.0 thread); Rear Brake Caliper Assembly Bolts (to Axle Carrier) (torques to 107 Nm (79 ft-lbs), 17mm socket, M12x1.25 thread); Front ABS Speed Sensor Bolt (to Steering Knuckle) (torques to 8.5 Nm (75 in-lbs), 10mm socket, M6x1.0 thread); Rear Flexible Hose Bracket Bolt (to Axle Carrier) (torques to 29 Nm (21 ft-lbs), 12mm socket, M8x1.25 thread); Rear ABS Speed Sensor Bolt (to Rear Axle Carrier) (torques to 8.5 Nm (75 in-lbs), 10mm socket, M6x1.0 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
How to do a RAV4 brake job right
Consult the service manual for the exact axle and variant before starting. Identify the mounting bolts, bracket bolts and slide/guide pins separately. Bolt reuse, lubrication, threadlocker and torque-to-yield requirements are application-specific, not universal rules for a display group. Support the caliper safely without loading the hose, and use the specified tightening sequence with a calibrated torque wrench rather than an impact tool.
Tools you need for a RAV4 brake job
Recorded socket sizes for 2021 Toyota RAV4: 10mm, 14mm, 11mm, 12mm, 17mm, 12mm Brake Line Wrench. Other tools may include a caliper slide-pin tool or hex/Torx bit set, a torque wrench that covers the specified torque values, plus thread-locker or brake lubricant only where the manual calls for it. A caliper piston compressor makes seating the new pads far easier. See the recommended tools and replacement hardware linked below.
Related lookups
- 2021 Toyota RAV4 — Full Bolt & Torque Specs
- 2021 Toyota RAV4 Suspension & Steering Torque
- 2021 Toyota RAV4 Lug Nut Torque
- Standard Torque Specs by Grade
Loading interactive lookup…