2026 Nissan Pathfinder Brake Job Torque Specs
Compare 7 named brake fastener records for 2026 Nissan Pathfinder. These records are not a universal caliper mounting or bracket torque answer. Verify the exact part, axle, variant and source against the service manual. Full bolt records for the rest of the vehicle are linked below.
Caliper Bracket Bolts records — 2026 Nissan Pathfinder
Recorded fastener names and fields for 2026 Nissan Pathfinder: Front Brake Caliper Bracket Bolt (torques to 133 ft-lbs (180 Nm)); Rear Caliper Bracket Bolt (torques to 65 ft-lb (88 Nm), 21mm socket, M14x1.5 thread); Front Caliper Bracket Bolt (torques to 107 ft-lbs (145 Nm), 22mm socket, M14x1.5 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Caliper Slide / Guide Pins records — 2026 Nissan Pathfinder
Recorded fastener names and fields for 2026 Nissan Pathfinder: Rear Brake Caliper Bolt (torques to 34 ft-lb (46 Nm), 14mm socket, M10x1.25 thread); Front Brake Caliper Guide Pin Bolt (torques to 34 ft-lbs (46 Nm)); Front Brake Caliper Bolt (torques to 34 ft-lb (46 Nm), 17mm socket, M12x1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Hydraulic (Banjo & Bleeder) records — 2026 Nissan Pathfinder
Recorded fastener names and fields for 2026 Nissan Pathfinder: Brake Bleeder Screw (torques to 12 ft-lbs (16 Nm), 8mm socket). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
How to do a Pathfinder brake job right
Consult the service manual for the exact axle and variant before starting. Identify the mounting bolts, bracket bolts and slide/guide pins separately. Bolt reuse, lubrication, threadlocker and torque-to-yield requirements are application-specific, not universal rules for a display group. Support the caliper safely without loading the hose, and use the specified tightening sequence with a calibrated torque wrench rather than an impact tool.
Tools you need for a Pathfinder brake job
Recorded socket sizes for 2026 Nissan Pathfinder: 8mm, 14mm, 21mm, 17mm, 22mm. Other tools may include a caliper slide-pin tool or hex/Torx bit set, a torque wrench that covers the specified torque values, plus thread-locker or brake lubricant only where the manual calls for it. A caliper piston compressor makes seating the new pads far easier. See the recommended tools and replacement hardware linked below.
Related lookups
- 2026 Nissan Pathfinder — Full Bolt & Torque Specs
- 2026 Nissan Pathfinder Suspension & Steering Torque
- 2026 Nissan Pathfinder Lug Nut Torque
- Standard Torque Specs by Grade
Loading interactive lookup…