2017 Toyota C-HR Oil Drain Plug Torque & Size
The 2017 Toyota C-HR oil drain plug torque is 30 ft-lbs (40 Nm) on a M12x1.25 thread, using a 15mm. Fit a new crush washer at every oil change and tighten to the listed specification rather than feel.
How tight should the 2017 Toyota C-HR oil drain plug be?
Torque it to 30 ft-lbs (40 Nm) with a calibrated torque wrench, not an impact gun. Over-tightening strips the aluminum pan threads; under-tightening leaks. Always replace the crush washer.
What size is the 2017 Toyota C-HR oil drain plug?
It takes a 15mm. Thread size: M12x1.25. Some drain plugs use a hex/Allen key or square drive rather than a conventional socket.
Tools for an oil change
As an Amazon Associate WhatSizeBolt earns from qualifying purchases. Tool picks are general options, not a fit guarantee for your vehicle or fastener.
- 3/8-Inch Click Torque WrenchA low-range wrench reads drain plug torque more accurately than a big 1/2-inch one. Check its range includes your spec.LEXIVON 3/8" Drive Click Torque Wrench, 10–80 ft-lb (LX-182) — view on Amazon
- Oil Drain PanCatches the old oil without a spill. Opens an Amazon search.Amazon search results
- Crush Washers / Drain Plug GasketsFit a new one every oil change; match the plug diameter before ordering. Opens an Amazon search.Amazon search results
Related lookups
- All 2017 Toyota C-HR fastener specs
- Oil Drain Plug Torque by Vehicle
- Lug Nut Torque Lookup
- Standard Torque Specs
Loading interactive lookup…