2014 Chevrolet Suburban Lug Nut Torque & Bolt Specs

The 2014 Chevrolet Suburban lug nut torque is 140 ft-lbs, tightened with a 22mm socket on M14x1.5 studs. Torque in a star pattern in two passes (snug, then final), and re-check after the first 50–100 miles of driving. Use a calibrated torque wrench — not an impact gun — for the final pass. The wheel bolt pattern is 6x139.7.

Lug nut torque: 140 ft-lbs · Socket size: 22mm · Thread: M14x1.5 · Bolt pattern: 6x139.7.

This page is the OEM-referenced fastener summary for the 2014 Chevrolet Suburban. Use it before any maintenance or repair job where torque values matter — brake work, wheel changes, suspension service, engine teardowns, or oil changes. Specs are pulled from manufacturer service literature, cross-checked against community data, and updated as new chassis variants become available.

GM lug-nut torque clusters around 140 ft-lbs (190 Nm) for half-ton Silverado/Sierra and 100 ft-lbs for passenger cars like Malibu, Impala, and Cruze. GM heavy-duty trucks (2500HD/3500HD) jump to 165 ft-lbs. Most GM passenger cars use a 19mm socket; trucks moved from 22mm to 22mm-with-deep-well in 2014. Watch for GM's flat-flange lug nut design on the Silverado — the standard cone-seat aftermarket lugs will not seat correctly.

Common fastener categories on the 2014 Chevrolet Suburban

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket bolts (typically 80-130 ft-lbs) and slide/guide pins (18-35 ft-lbs)
Engine oil drain plug torque — rarely above 30 ft-lbs; always use a new crush washer
Transmission pan, valve cover, and intake manifold bolts (low torque, often 89-106 in-lbs)
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque (typically 10-15 ft-lbs on aluminum heads — do not exceed)
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2014 model-year work: This era introduced widespread torque-to-yield (TTY) bolts on head, main, and crank pulley fasteners. TTY bolts stretch permanently when torqued and must not be reused — the spec calls for a fresh bolt every time. Always verify TTY status against the FSM before reassembly.

Tools you will need

Metric socket set (8mm-22mm), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Anti-seize on stainless or dissimilar-metal threads; thread-locker (Loctite blue) on critical reassembly

Frequently asked questions

What is the lug nut torque on a 2014 Chevrolet Suburban?

The OEM-specified lug-nut torque for the 2014 Chevrolet Suburban is 140 ft-lbs, using a 22mm socket on M14x1.5 thread studs. Use a calibrated torque wrench in a star pattern, in two passes (50% and 100%), and re-check after 50-100 miles of driving.

What socket size do I need for the 2014 Chevrolet Suburban lug nuts?

The 2014 Chevrolet Suburban uses a 22mm socket. A 6-point impact-rated socket is recommended over a 12-point chrome socket — 12-points round off lug nuts under impact-driver use.

Are the 2014 Chevrolet Suburban fasteners metric or SAE?

Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.

Other Chevrolet Suburban years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2014 Chevrolet Suburban oil drain plug torque & size

→ 2014 Chevrolet Suburban suspension & steering torque specs (control arm, ball joint, tie rod)

All 8 2014 Chevrolet Suburban fastener specs

Per-bolt torque, wrench size, and thread spec for the 2014 Chevrolet Suburban, sourced from OEM service literature and verified against community shop data. Values pair imperial (ft-lb) and metric (Nm) where the manufacturer publishes both. 3 of the 8 fastener specs on this page are independently verified against OEM service manuals and manufacturer torque data (last reviewed June 2026).

Wheels — 2014 Chevrolet Suburban

Wheel and lug nut spec for the 2014 Chevrolet Suburban. The lug nut uses a 22mm drive on a M14x1.5 thread, torqued to 140 ft-lbs at the all six wheels.

Brakes — 2014 Chevrolet Suburban

Brake fasteners on the 2014 Chevrolet Suburban — caliper bracket, slide pins, and banjo bolt torque follow. At the front brake caliper bracket to knuckle, the front brake caliper bracket bolt torques to 129 ft-lbs (175 Nm) (21mm drive, M14 thread). OEM-verified spec. For the front caliper slide pin, plan for a 18mm tool on a M12 stud; final torque is 74 ft-lbs (100 Nm) (front brake caliper slide pin). Confirmed against manufacturer service literature.

Engine — 2014 Chevrolet Suburban

Engine bolt-by-bolt torque for the 2014 Chevrolet Suburban, including the long block, valve covers, and intake. For the oil pan, plan for a 15mm tool on a M14x1.5 stud; final torque is 18 ft-lbs (oil drain plug). Spark plug tightens to 11 ft-lbs (15 Nm), takes a 5/8 in. (16mm) driver, runs on M14x1.25 threads, located at the cylinder head. This figure is independently verified against OEM service data.

Suspension — 2014 Chevrolet Suburban

Suspension and chassis fastener torque for the 2014 Chevrolet Suburban — strut, control arm, and sway bar values. Sway bar end link nut tightens to 67 ft-lbs, takes a 18mm driver, runs on M14x1.5 threads, located at the front sway bar end link to bracket. The front hub/bearing nut (4wd) uses a 36mm drive on a M28x1.5 thread, torqued to 177 ft-lbs at the front axle hub bearing nut.

Steering — 2014 Chevrolet Suburban

Steering linkage fasteners on the 2014 Chevrolet Suburban. The tie rod end nut uses a 21mm drive on a M14x1.5 thread, torqued to 55 ft-lbs at the outer tie rod end to steering knuckle.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2014 Chevrolet Suburban numbers above.

Loading the interactive 2014 Chevrolet Suburban fastener lookup with per-bolt filtering, part links, and torque tools…