2025 Chevrolet Trailblazer Lug Nut Torque & Bolt Specs

The 2025 Chevrolet Trailblazer lug nut torque is 100 ft-lbs (140 Nm) on M12x1.5 studs. Torque in a star pattern in two passes (snug, then final), and re-check after the first 50–100 miles of driving. Use a calibrated torque wrench — not an impact gun — for the final pass. The wheel bolt pattern is 5x115.

Lug nut torque: 100 ft-lbs (140 Nm) · Thread: M12x1.5 · Bolt pattern: 5x115.

This page is the OEM-referenced fastener summary for the 2025 Chevrolet Trailblazer. Use it before any maintenance or repair job where torque values matter — brake work, wheel changes, suspension service, engine teardowns, or oil changes. Specs are pulled from manufacturer service literature, cross-checked against community data, and updated as new chassis variants become available.

GM lug-nut torque clusters around 140 ft-lbs (190 Nm) for half-ton Silverado/Sierra and 100 ft-lbs for passenger cars like Malibu, Impala, and Cruze. GM heavy-duty trucks (2500HD/3500HD) jump to 165 ft-lbs. Most GM passenger cars use a 19mm socket; trucks moved from 22mm to 22mm-with-deep-well in 2014. Watch for GM's flat-flange lug nut design on the Silverado — the standard cone-seat aftermarket lugs will not seat correctly.

Common fastener categories on the 2025 Chevrolet Trailblazer

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket bolts (typically 80-130 ft-lbs) and slide/guide pins (18-35 ft-lbs)
Engine oil drain plug torque — rarely above 30 ft-lbs; always use a new crush washer
Transmission pan, valve cover, and intake manifold bolts (low torque, often 89-106 in-lbs)
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque (typically 10-15 ft-lbs on aluminum heads — do not exceed)
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2025 late-model work: Modern vehicles increasingly use aluminum body and suspension components. Aluminum fastener torque is typically 60-70% of equivalent steel torque, and aluminum threads strip easily. Use a calibrated torque wrench and apply anti-seize on any steel fastener threading into aluminum.

Tools you will need

Metric socket set (8mm-22mm), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Anti-seize on stainless or dissimilar-metal threads; thread-locker (Loctite blue) on critical reassembly

Frequently asked questions

What is the lug nut torque on a 2025 Chevrolet Trailblazer?

The OEM-specified lug-nut torque for the 2025 Chevrolet Trailblazer is 100 ft-lbs (140 Nm) on M12x1.5 thread studs. Use a calibrated torque wrench in a star pattern, in two passes (50% and 100%), and re-check after 50-100 miles of driving.

What socket size do I need for the 2025 Chevrolet Trailblazer lug nuts?

Most modern Chevrolet vehicles use a 19mm or 21mm socket. Older Chevrolet models from before 2000 may use a 13/16" SAE socket on certain trims. Confirm against the actual lug before purchasing aftermarket wheels.

Are the 2025 Chevrolet Trailblazer fasteners metric or SAE?

Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.

Other Chevrolet Trailblazer years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2025 Chevrolet Trailblazer suspension & steering torque specs (control arm, ball joint, tie rod)

→ 2025 Chevrolet Trailblazer axle nut torque spec (CV axle & hub nut)

All 22 2025 Chevrolet Trailblazer fastener specs

Per-bolt torque, wrench size, and thread spec for the 2025 Chevrolet Trailblazer, sourced from OEM service literature and verified against community shop data. Values pair imperial (ft-lb) and metric (Nm) where the manufacturer publishes both.

Wheels — 2025 Chevrolet Trailblazer

Wheel and lug nut spec for the 2025 Chevrolet Trailblazer. The lug nut is a M12x1.5 thread, torqued to 100 ft-lbs (140 Nm).

Brakes — 2025 Chevrolet Trailblazer

Brake fasteners on the 2025 Chevrolet Trailblazer — caliper bracket, slide pins, and banjo bolt torque follow. The front caliper guide pin bolt torques to 27 ft-lbs (37 Nm). plan for the right driver; final torque is 111 ft-lbs (150 Nm) + 15-30 deg (front caliper bracket bolt). Rear caliper bracket bolt tightens to 74 ft-lbs (100 Nm). The rear caliper guide pin bolt, torqued to 30 ft-lbs (40 Nm).

Drivetrain — 2025 Chevrolet Trailblazer

Drivetrain and driveline fasteners for the 2025 Chevrolet Trailblazer — axle, transmission, and differential plugs. plan for the right driver; final torque is 185 ft-lbs (250 Nm) (front axle hub nut). Rear axle hub nut tightens to 185 ft-lbs (250 Nm).

Suspension — 2025 Chevrolet Trailblazer

Suspension and chassis fastener torque for the 2025 Chevrolet Trailblazer — strut, control arm, and sway bar values. Front strut to knuckle nut tightens to 74 ft-lbs (100 Nm) + 45-60 deg. The front strut top mount bolt, torqued to 16 ft-lbs (22 Nm) + 30-45 deg. The front lower ball joint to knuckle nut torques to 26 ft-lbs (35 Nm) + 95-105 deg. plan for the right driver; final torque is 59 ft-lbs (80 Nm) + 45-60 deg (front lower control arm rear nut). Front strut rod mount nut tightens to 52 ft-lbs (70 Nm). The front sway bar bracket bolt, torqued to 16 ft-lbs (22 Nm). The front wheel hub to knuckle bolt torques to 74 ft-lbs (100 Nm) + 65-75 deg. plan for the right driver; final torque is 43 ft-lbs (58 Nm) + 30-45 deg (rear wheel hub to knuckle bolt). Front sway bar link nut tightens to 74 ft-lbs (100 Nm). The rear twist beam bolt, torqued to 43 ft-lbs (58 Nm). The rear trailing arm bolt torques to 103 ft-lbs (140 Nm) + 30-45 deg. plan for the right driver; final torque is 59 ft-lbs (80 Nm) + 30-45 deg (rear shock absorber bolt). Front lower control arm front bolt tightens to 74 ft-lbs (100 Nm) + 60-75 deg.

Steering — 2025 Chevrolet Trailblazer

Steering linkage fasteners on the 2025 Chevrolet Trailblazer. The outer tie rod end nut, torqued to 22 ft-lbs (30 Nm) + 120-130 deg. The steering gear bolt torques to 74 ft-lbs (100 Nm) + 90-105 deg.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2025 Chevrolet Trailblazer numbers above.

Loading the interactive 2025 Chevrolet Trailblazer fastener lookup with per-bolt filtering, part links, and torque tools…