2017 Ford Transit Lug Nut Torque & Bolt Specs

The 2017 Ford Transit lug nut torque is 148 ft-lbs (200 Nm), tightened with a 21mm socket on M14x1.5 studs. Torque in a star pattern in two passes (snug, then final), and re-check after the first 50–100 miles of driving. Use a calibrated torque wrench — not an impact gun — for the final pass. The wheel bolt pattern is 5x160.

Lug nut torque: 148 ft-lbs (200 Nm) · Socket size: 21mm · Thread: M14x1.5 · Bolt pattern: 5x160.

This page is the OEM-referenced fastener summary for the 2017 Ford Transit. Use it before any maintenance or repair job where torque values matter — brake work, wheel changes, suspension service, engine teardowns, or oil changes. Specs are pulled from manufacturer service literature, cross-checked against community data, and updated as new chassis variants become available.

Ford lug-nut torque varies more by chassis than most makes — 100 ft-lbs for Focus/Fusion/Fiesta, 150 ft-lbs for half-ton F-150, and 165 ft-lbs for Super Duty F-250/F-350. F-150s from 2004-2014 use a 21mm OEM socket, while 2015+ aluminum-body trucks moved to the larger 22mm. Ford torque-to-yield (TTY) head bolts are standard from the early 2000s — do not reuse them, ever.

Common fastener categories on the 2017 Ford Transit

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket bolts (typically 80-130 ft-lbs) and slide/guide pins (18-35 ft-lbs)
Engine oil drain plug torque — rarely above 30 ft-lbs; always use a new crush washer
Transmission pan, valve cover, and intake manifold bolts (low torque, often 89-106 in-lbs)
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque (typically 10-15 ft-lbs on aluminum heads — do not exceed)
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2017 model-year work: This era introduced widespread torque-to-yield (TTY) bolts on head, main, and crank pulley fasteners. TTY bolts stretch permanently when torqued and must not be reused — the spec calls for a fresh bolt every time. Always verify TTY status against the FSM before reassembly.

Tools you will need

Metric socket set (8mm-22mm), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Anti-seize on stainless or dissimilar-metal threads; thread-locker (Loctite blue) on critical reassembly

Frequently asked questions

What is the lug nut torque on a 2017 Ford Transit?

The OEM-specified lug-nut torque for the 2017 Ford Transit is 148 ft-lbs (200 Nm), using a 21mm socket on M14x1.5 thread studs. Use a calibrated torque wrench in a star pattern, in two passes (50% and 100%), and re-check after 50-100 miles of driving.

What socket size do I need for the 2017 Ford Transit lug nuts?

The 2017 Ford Transit uses a 21mm socket. A 6-point impact-rated socket is recommended over a 12-point chrome socket — 12-points round off lug nuts under impact-driver use.

Are the 2017 Ford Transit fasteners metric or SAE?

Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.

Other Ford Transit years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2017 Ford Transit suspension & steering torque specs (control arm, ball joint, tie rod)

All 6 2017 Ford Transit fastener specs

Per-bolt torque, wrench size, and thread spec for the 2017 Ford Transit, sourced from OEM service literature and verified against community shop data. Values pair imperial (ft-lb) and metric (Nm) where the manufacturer publishes both.

Wheels — 2017 Ford Transit

Wheel and lug nut spec for the 2017 Ford Transit. Lug nut tightens to 148 ft-lbs (200 Nm), takes a 21mm driver, runs on M14x1.5 threads.

Brakes — 2017 Ford Transit

Brake fasteners on the 2017 Ford Transit — caliper bracket, slide pins, and banjo bolt torque follow. The front caliper bracket bolt, torqued to 203 ft-lbs (275 Nm).

Suspension — 2017 Ford Transit

Suspension and chassis fastener torque for the 2017 Ford Transit — strut, control arm, and sway bar values. The front strut to knuckle lower bolt torques to 76 ft-lbs (103 Nm). plan for the right driver; final torque is 22 ft-lbs (30 Nm) + 90 deg (front wheel hub retaining bolt). Front sway bar link nut tightens to 76 ft-lbs (103 Nm).

Steering — 2017 Ford Transit

Steering linkage fasteners on the 2017 Ford Transit. plan for the right driver; final torque is 59 ft-lbs (80 Nm) (tie rod end nut).

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2017 Ford Transit numbers above.

Loading the interactive 2017 Ford Transit fastener lookup with per-bolt filtering, part links, and torque tools…