2024 GMC Canyon Lug Nut Torque & Bolt Specs
The 2024 GMC Canyon lug nut torque is 100 ft-lbs (135 Nm), tightened with a 22mm socket on M12x1.5 studs. Torque in a star pattern in two passes (snug, then final), and re-check after the first 50–100 miles of driving. Use a calibrated torque wrench — not an impact gun — for the final pass.
Lug nut torque: 100 ft-lbs (135 Nm) · Socket size: 22mm · Thread: M12x1.5.
This page is the OEM-referenced fastener summary for the 2024 GMC Canyon. Use it before any maintenance or repair job where torque values matter — brake work, wheel changes, suspension service, engine teardowns, or oil changes. Specs are pulled from manufacturer service literature, cross-checked against community data, and updated as new chassis variants become available.
GM lug-nut torque clusters around 140 ft-lbs (190 Nm) for half-ton Silverado/Sierra and 100 ft-lbs for passenger cars like Malibu, Impala, and Cruze. GM heavy-duty trucks (2500HD/3500HD) jump to 165 ft-lbs. Most GM passenger cars use a 19mm socket; trucks moved from 22mm to 22mm-with-deep-well in 2014. Watch for GM's flat-flange lug nut design on the Silverado — the standard cone-seat aftermarket lugs will not seat correctly.
Common fastener categories on the 2024 GMC Canyon
- Wheel / lug nut torque and thread spec (covered above)
- Brake caliper bracket bolts (typically 80-130 ft-lbs) and slide/guide pins (18-35 ft-lbs)
- Engine oil drain plug torque — rarely above 30 ft-lbs; always use a new crush washer
- Transmission pan, valve cover, and intake manifold bolts (low torque, often 89-106 in-lbs)
- Suspension control arm, sway bar, tie rod end and ball joint torque
- Spark plug torque (typically 10-15 ft-lbs on aluminum heads — do not exceed)
- Differential cover bolts (RWD/4WD only) and transfer case fasteners
Repair guidance for this model year
For 2024 late-model work: Modern vehicles increasingly use aluminum body and suspension components. Aluminum fastener torque is typically 60-70% of equivalent steel torque, and aluminum threads strip easily. Use a calibrated torque wrench and apply anti-seize on any steel fastener threading into aluminum.
Tools you will need
- Metric socket set (8mm-22mm), 6-point impact-rated
- Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
- Breaker bar (24" minimum) for initial loosening
- Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
- Anti-seize on stainless or dissimilar-metal threads; thread-locker (Loctite blue) on critical reassembly
Frequently asked questions
What is the lug nut torque on a 2024 GMC Canyon?
The OEM-specified lug-nut torque for the 2024 GMC Canyon is 100 ft-lbs (135 Nm), using a 22mm socket on M12x1.5 thread studs. Use a calibrated torque wrench in a star pattern, in two passes (50% and 100%), and re-check after 50-100 miles of driving.
What socket size do I need for the 2024 GMC Canyon lug nuts?
The 2024 GMC Canyon uses a 22mm socket. A 6-point impact-rated socket is recommended over a 12-point chrome socket — 12-points round off lug nuts under impact-driver use.
Are the 2024 GMC Canyon fasteners metric or SAE?
Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.
Other GMC Canyon years
Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.
- 2025 GMC Canyon lug nut torque
- 2023 GMC Canyon lug nut torque
- 2022 GMC Canyon lug nut torque
- 2021 GMC Canyon lug nut torque
- 2020 GMC Canyon lug nut torque
- 2019 GMC Canyon lug nut torque
- 2018 GMC Canyon lug nut torque
- 2017 GMC Canyon lug nut torque
- 2016 GMC Canyon lug nut torque
- 2015 GMC Canyon lug nut torque
- 2012 GMC Canyon lug nut torque
- 2011 GMC Canyon lug nut torque
- 2010 GMC Canyon lug nut torque
- 2009 GMC Canyon lug nut torque
- 2008 GMC Canyon lug nut torque
- 2007 GMC Canyon lug nut torque
→ 2024 GMC Canyon oil drain plug torque & size
All 3 2024 GMC Canyon fastener specs
Per-bolt torque, wrench size, and thread spec for the 2024 GMC Canyon, sourced from OEM service literature and verified against community shop data. Values pair imperial (ft-lb) and metric (Nm) where the manufacturer publishes both.
Wheels — 2024 GMC Canyon
Wheel and lug nut spec for the 2024 GMC Canyon. The lug nut uses a 22mm drive on a M12x1.5 thread, torqued to 100 ft-lbs (135 Nm) at the all corners.
Brakes — 2024 GMC Canyon
Brake fasteners on the 2024 GMC Canyon — caliper bracket, slide pins, and banjo bolt torque follow. At the front caliper bracket, the front caliper bracket bolt torques to 80 ft-lb (18mm drive, M12x1.75 thread).
Engine — 2024 GMC Canyon
Engine bolt-by-bolt torque for the 2024 GMC Canyon, including the long block, valve covers, and intake. For the oil pan, plan for a 15mm tool on a M12x1.75 stud; final torque is 18 ft-lbs (25 Nm) (oil drain plug).
New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2024 GMC Canyon numbers above.
Loading the interactive 2024 GMC Canyon fastener lookup with per-bolt filtering, part links, and torque tools…