2021 GMC Canyon Lug Nut Torque & Bolt Specs

The source-backed 2021 GMC Canyon lug nut torque is 140 ft-lbs (190 Nm). Match the application and hardware conditions in the cited manual; do not assume the same value applies to aftermarket hardware.

Does this apply to my Canyon?

Yes — the same 140 ft-lbs (190 Nm) for every 2021 GMC Canyon version we checked: 5 of 5 trim/engine versions, against the 2021 GMC Canyon Owner's Manual, Wheel nut tightening torque (quoted).

Versions checked (5)
  • 2.5L I4: Base, SLE, SLT
  • 3.6L V6: AT4, Denali

This figure assumes: OEM wheels and lug nuts as specified in the owner's manual.

Aftermarket wheels or lug nuts: use the wheel or lug-nut maker's figure.

Lug nut torque: 140 ft-lbs (190 Nm).

Where these numbers come from

1 value for the 2021 GMC Canyon is checked against a maker’s document. Each row names the document, the page or section and the manual’s own wording, so you can check it yourself.

SpecValueDocument and pageManual wordingApplies to
Lug Nut — torque140 ft-lbs (190 Nm)2021 GMC Canyon Owner's Manual, Wheel nut tightening torque (quoted) · chevrolet.com“Wheel Nut Torque 190 Y 140 lb ft”OEM wheels and lug nuts as specified in the owner's manual. Applies to: 2.5L I4: Base, SLE, SLT; 3.6L V6: AT4, Denali (5 configurations).

Latest proof checked 2026-09-06. Values that changed after a check are listed in the corrections log.

Tools for this job

Matched to the specs on this page.

As an Amazon Associate I earn from qualifying purchases. Tool picks are general options, not a fit guarantee for your vehicle or fastener.

Every value on this page for the 2021 GMC Canyon names the document it was checked against. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

Frequently asked questions

What is the lug nut torque on a 2021 GMC Canyon?

The source-backed lug-nut torque for the 2021 GMC Canyon is 140 ft-lbs (190 Nm). Match the exact application, hardware and tightening conditions in the cited manual. Field evidence: Lug nut torque confirmed against 2021 GMC Canyon Owner's Manual, Wheel nut tightening torque (quoted) (https://www.chevrolet.com/ownercenter/content/dam/gmownercenter/gmna/dynamic/manuals/2021/gmc/canyon/2021-gmc-canyon-owners-manual.pdf). OEM wheels and lug nuts as specified in the owner's manual; engine: 3.6L V6; trim: AT4.

Does the 2021 GMC Canyon lug nut torque depend on trim or engine?

No. We found the same 140 ft-lbs (190 Nm) for every 2021 GMC Canyon version we checked: 5 of 5 trim/engine versions, against the 2021 GMC Canyon Owner's Manual, Wheel nut tightening torque (quoted). This figure assumes: OEM wheels and lug nuts as specified in the owner's manual. Aftermarket wheels or lug nuts: use the wheel or lug-nut maker's figure.

Are the 2021 GMC Canyon fasteners metric or SAE?

Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.

Not yet verified for the 2021 GMC Canyon: lug nut socket size. Check your owner’s or service manual, or ask a dealer. Send a correction

Other GMC Canyon years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

Fasteners on record for the 2021 GMC Canyon

1 of the 3 fasteners on record for the 2021 GMC Canyon has at least one value checked against a maker’s document; each sentence below names it. A checked torque does not confirm the socket size, thread or part number. Where sources disagree, the value is withheld.

Wheels — 2021 GMC Canyon

Wheel fasteners checked against a maker’s document for the 2021 GMC Canyon. Lug Nut (All corners). Torque: 140 ft-lbs (190 Nm). Source: 2021 GMC Canyon Owner's Manual, Wheel nut tightening torque (quoted). OEM wheels and lug nuts as specified in the owner's manual engine: 3.6L V6; trim: AT4

Also on record but not yet checked against a maker’s document (2): Front Caliper Bracket Bolt, Oil Drain Plug. Their stored figures are not shown until a document confirms them. Have the factory figure? Send a correction.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.

Loading the interactive 2021 GMC Canyon fastener lookup with per-bolt filtering, part links, and torque tools…