2019 Toyota C-HR Lug Nut Torque & Bolt Specs

The source-backed 2019 Toyota C-HR lug nut torque is 76 ft-lbs (103 Nm). Match the application and hardware conditions in the cited manual; do not assume the same value applies to aftermarket hardware.

Lug nut torque: 76 ft-lbs (103 Nm).

This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2019 Toyota C-HR. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

Field evidence: Lug nut torque confirmed against Toyota owner's manual (PDF), Wheel nut tightening torque (quoted) (https://assets.sipb.toyota.com/publications/en/om-s/OM10569U/pdf/OM10569U.pdf). OEM wheels and lug nuts as specified in the owner's manual engine: 2.0L 4-Cylinder; trim: LE Lug nut socket size is not verified; no specification is assumed. Lug nut thread size is not verified; no specification is assumed. Lug nut part number is not verified; no specification is assumed.

Wheel Lug Nut — torque: 76 ft-lbs (103 Nm) — Toyota owner's manual (PDF), Wheel nut tightening torque (quoted). OEM wheels and lug nuts as specified in the owner's manual. Applies to: 2.0L 4-Cylinder: LE, Limited, XLE (3 configurations).

Toyota and Lexus wheel hardware is often consistent within a platform, but torque, thread and socket details still vary by chassis and model year. Use the exact record above and confirm against the wheel, hub and service manual before buying replacement lug nuts.

Common fastener categories on the 2019 Toyota C-HR

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
Transmission pan, valve cover, and intake manifold bolts where the database has exact records
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque only when a vehicle-specific spark-plug row is available
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2019 late-model work: Modern vehicles increasingly mix aluminum, high-strength steel and coated fasteners. Use the exact fastener record and service-manual procedure for the joint you are touching; do not adjust torque or add compounds unless the procedure calls for it.

Tools you will need

Metric and SAE socket set (8mm-22mm plus 1/4"-7/8"), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them

Frequently asked questions

What is the lug nut torque on a 2019 Toyota C-HR?

The source-backed lug-nut torque for the 2019 Toyota C-HR is 76 ft-lbs (103 Nm). Match the exact application, hardware and tightening conditions in the cited manual. Field evidence: Lug nut torque confirmed against Toyota owner's manual (PDF), Wheel nut tightening torque (quoted) (https://assets.sipb.toyota.com/publications/en/om-s/OM10569U/pdf/OM10569U.pdf). OEM wheels and lug nuts as specified in the owner's manual engine: 2.0L 4-Cylinder; trim: LE Lug nut socket size is not verified; no specification is assumed. Lug nut thread size is not verified; no specification is assumed. Lug nut part number is not verified; no specification is assumed.

What socket size do I need for the 2019 Toyota C-HR lug nuts?

Confirm the socket against the actual lug nut; no size is assumed here.

Are the 2019 Toyota C-HR fasteners metric or SAE?

Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.

Other Toyota C-HR years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2019 Toyota C-HR oil drain plug torque & size

→ 2019 Toyota C-HR suspension & steering torque specs (control arm, ball joint, tie rod)

35 recorded 2019 Toyota C-HR fasteners

Per-field evidence and legacy records for the 2019 Toyota C-HR. A verified torque does not verify socket size, thread or part number. Unverified records are not installation instructions; conflicting specifications are withheld. 2 of the 35 records carry legacy review labels (last reviewed September 2026); those labels do not verify individual fields.

Brakes — 2019 Toyota C-HR

Brake fastener records and field evidence for the 2019 Toyota C-HR. Caliper Bracket Bolt (Steering Knuckle). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Brake Caliper Pin (Caliper Bracket). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Brake Line Banjo Bolt (Caliper). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Brake Rotor Set Screw (Rotor Face). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Engine — 2019 Toyota C-HR

Engine fastener records and field evidence for the 2019 Toyota C-HR. Connecting Rod Bolt (Engine). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Oil Filter (Engine Block). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Spark Plug (Cylinder Head). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Timing Cover Bolt (Front of Engine). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Water Pump Bolt (Front of Engine). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Valve Cover Bolt (Cylinder Head). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Oil Filter Housing Bolt (Engine Block). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Engine Mount Bolt (Subframe). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Oil Drain Plug (Oil Pan). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Alternator Bolt (Front of Engine). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Cylinder Head Bolt (Engine). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Suspension — 2019 Toyota C-HR

Suspension fastener records and field evidence for the 2019 Toyota C-HR. Sway Bar Link Nut (Sway Bar). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Lower Control Arm Bolt (Subframe). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Strut Upper Nut (Strut Tower). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Tie Rod End Nut (Knuckle). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Strut Mount Nut (Strut Tower). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Ball Joint Nut (Control Arm). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Lower Control Arm (Subframe). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Strut Lower Bolt (Knuckle). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Shock Lower Bolt (Rear Axle). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Wheel Lug Nut (Wheel Hub). Torque: 76 ft-lbs (103 Nm). Source: Toyota owner's manual (PDF), Wheel nut tightening torque (quoted) (https://assets.sipb.toyota.com/publications/en/om-s/OM10569U/pdf/OM10569U.pdf). OEM wheels and lug nuts as specified in the owner's manual engine: 2.0L 4-Cylinder; trim: LE Socket size: not verified. Thread: not verified. Part number: not verified.

Interior — 2019 Toyota C-HR

Interior fasteners on the 2019 Toyota C-HR. Center Console Bolt (Floor Pan). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Door Hinge Bolt (Door Frame). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Seat Mount Bolt (Floor Pan). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Seat Belt Anchor Bolt (B-Pillar). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Door Panel Clip (Door Panel). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Brake — 2019 Toyota C-HR

Brake fasteners on the 2019 Toyota C-HR. Front Brake Caliper Bolt (Front Caliper). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Brake Caliper Bracket (Front Hub). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Brake Caliper Bolt (Rear Caliper). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Wheel — 2019 Toyota C-HR

Wheel fasteners on the 2019 Toyota C-HR. Front Axle Nut (Front). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Transmission — 2019 Toyota C-HR

Transmission fasteners on the 2019 Toyota C-HR. Transmission Drain Plug (Trans Pan). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.

Loading the interactive 2019 Toyota C-HR fastener lookup with per-bolt filtering, part links, and torque tools…