2004 Hyundai Elantra Axle Nut Torque Spec

Axle and hub nut torque values from our fastener database for the 3 axle and hub nut entries on the 2004 Hyundai Elantra — including the Front Hub / Axle Nut (torques to 192 ft-lbs (260 Nm), source: SKF Torque specification guide 2023 - Front & rear axle nut, hub mount and lug nut torque specifications, p. PDF p. 16). Confirm every value and the complete procedure in your factory service manual before reassembly. Do not infer bearing adjustment or installation instructions from the nut’s name or torque value. Full bolt specs for the rest of the vehicle are linked below.

Front Axle / Hub Nut torque — 2004 Hyundai Elantra

Our fastener database lists these front axle / hub nut entries for the 2004 Hyundai Elantra: Front Hub / Axle Nut (torques to 192 ft-lbs (260 Nm), source: SKF Torque specification guide 2023 - Front & rear axle nut, hub mount and lug nut torque specifications, p. PDF p. 16); Front Hub/Bearing Nut (specification not verified). Axle nuts are safety-critical — fit a new nut where the manufacturer requires it and verify the value against your factory service manual before reassembly.

Rear Axle / Hub Nut torque — 2004 Hyundai Elantra

Our fastener database lists these rear axle / hub nut entries for the 2004 Hyundai Elantra: Rear Hub / Axle Nut (specification not verified). Axle nuts are safety-critical — fit a new nut where the manufacturer requires it and verify the value against your factory service manual before reassembly.

What should I check before torquing the Elantra axle nut?

Identify the exact year, model, drivetrain, axle position and hardware before choosing a procedure; a database value alone is not a complete instruction. Read the factory service manual before removal. Confirm the specified vehicle support and hub-holding method, replacement nut and locking hardware requirements. Confirm every tightening, loosening and angle step, the specified thread condition, and any time or loading restrictions. Use appropriately rated tools and follow the manufacturer’s complete sequence. For hub assembly installation, Timken MDV14 Q4 says to use a certified, calibrated torque wrench, not an impact wrench. It states that impacts can damage the axle nut, threads and components and can over- or under-torque nuts. This is general medium-duty hub guidance, not a vehicle-specific procedure. Follow your factory service manual for removal, installation, vehicle support and hub holding; this page does not prescribe a generic brake-holding or wheel-loading method.

Related lookups

Loading interactive lookup…