1993 Jeep Wrangler Brake Job Torque Specs
Compare 4 named brake fastener records for 1993 Jeep Wrangler. These records are not a universal caliper mounting or bracket torque answer. Verify the exact part, axle, variant and source against the service manual. Full bolt records for the rest of the vehicle are linked below.
Hydraulic (Banjo & Bleeder) records — 1993 Jeep Wrangler
Recorded fastener names and fields for 1993 Jeep Wrangler: Brake Line Banjo Bolt (torques to 25 ft-lbs, 14mm socket, M10x1.0 thread); Brake Line Bracket Bolt (torques to 89 in-lbs, 10mm socket, M6x1.0 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Other Brake Fasteners records — 1993 Jeep Wrangler
Recorded fastener names and fields for 1993 Jeep Wrangler: Master Cylinder Nut (torques to 25 ft-lbs, 15mm socket, M10x1.5 thread); Wheel Speed Sensor Bolt (torques to 89 in-lbs, 10mm socket, M6x1.0 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
How to do a Wrangler brake job right
Consult the service manual for the exact axle and variant before starting. Identify the mounting bolts, bracket bolts and slide/guide pins separately. Bolt reuse, lubrication, threadlocker and torque-to-yield requirements are application-specific, not universal rules for a display group. Support the caliper safely without loading the hose, and use the specified tightening sequence with a calibrated torque wrench rather than an impact tool.
Tools you need for a Wrangler brake job
Recorded socket sizes for 1993 Jeep Wrangler: 14mm, 15mm, 10mm. Other tools may include a caliper slide-pin tool or hex/Torx bit set, a torque wrench that covers the specified torque values, plus thread-locker or brake lubricant only where the manual calls for it. A caliper piston compressor makes seating the new pads far easier. See the recommended tools and replacement hardware linked below.
Related lookups
- 1993 Jeep Wrangler — Full Bolt & Torque Specs
- 1993 Jeep Wrangler Suspension & Steering Torque
- 1993 Jeep Wrangler Lug Nut Torque
- Standard Torque Specs by Grade
Loading interactive lookup…