2007 Toyota RAV4 Brake Job Torque Specs
Compare 18 named brake fastener records for 2007 Toyota RAV4. These records are not a universal caliper mounting or bracket torque answer. Verify the exact part, axle, variant and source against the service manual. Full bolt records for the rest of the vehicle are linked below.
Caliper Bracket Bolts records — 2007 Toyota RAV4
Recorded fastener names and fields for 2007 Toyota RAV4: Rear Caliper Bracket Bolt (to Axle Carrier) (torques to 88 Nm (65 ft-lbs), 17mm socket, M14x1.5 thread); Front Caliper Bracket Bolt (to Knuckle) (torques to 98 Nm (72 ft-lbs), 17mm socket, M14x1.5 thread); Front Brake Caliper Bracket Bolt (to Knuckle) (torques to 98 Nm (72 ft-lbs), 17mm socket, M12x1.25 thread); Rear Brake Caliper Bracket Bolt (to Carrier) (torques to 88 Nm (65 ft-lbs), 17mm socket, M12x1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Caliper Slide / Guide Pins records — 2007 Toyota RAV4
Recorded fastener names and fields for 2007 Toyota RAV4: Front Caliper Guide Pin Bolt (torques to 34 Nm (25 ft-lbs), 14mm socket, M10x1.25 thread); Rear Caliper Guide Pin Bolt (torques to 27 Nm (20 ft-lbs), 14mm socket, M10x1.25 thread); Rear Brake Caliper Guide Pin Bolt (torques to 27 Nm (20 ft-lbs), 14mm socket, M10x1.25 thread); Front Brake Caliper Guide Pin Bolt (torques to 34 Nm (25 ft-lbs), 14mm socket, M10x1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Hydraulic (Banjo & Bleeder) records — 2007 Toyota RAV4
Recorded fastener names and fields for 2007 Toyota RAV4: Front Brake Hose Banjo Bolt (torques to 29 Nm (21 ft-lbs), 17mm socket, M10x1.25 thread); Rear Brake Hose Banjo Bolt (torques to 30 Nm (22 ft-lbs), 17mm socket, M10x1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Parking-Brake Hardware records — 2007 Toyota RAV4
Recorded fastener names and fields for 2007 Toyota RAV4: Parking Brake Lever to Body Bolt (torques to 15 Nm (11 ft-lbs), 12mm socket, M8x1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
Other Brake Fasteners records — 2007 Toyota RAV4
Recorded fastener names and fields for 2007 Toyota RAV4: ABS Wheel Speed Sensor Bolt — Rear (torques to 8.5 Nm (75 in-lbs), 10mm socket, M8x1.25 thread); ABS Wheel Speed Sensor Bolt — Front (torques to 8.5 Nm (75 in-lbs), 10mm socket, M8x1.25 thread); Brake Master Cylinder Nut (torques to 13 Nm (10 ft-lbs), 14mm socket, M10x1.25 thread); Rear Speed (ABS) Sensor Bolt (torques to 8.5 Nm (75 in-lbs), 10mm socket, M6x1.0 thread); Brake Master Cylinder Bolt (torques to 13 Nm (9 ft-lbs), 12mm socket, M10x1.25 thread); Front Speed (ABS) Sensor Bolt (torques to 8.5 Nm (75 in-lbs), 10mm socket, M6x1.0 thread); ABS Actuator Bracket Bolt (to Body) (torques to 19 Nm (14 ft-lbs), 12mm socket, M8x1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.
How to do a RAV4 brake job right
Consult the service manual for the exact axle and variant before starting. Identify the mounting bolts, bracket bolts and slide/guide pins separately. Bolt reuse, lubrication, threadlocker and torque-to-yield requirements are application-specific, not universal rules for a display group. Support the caliper safely without loading the hose, and use the specified tightening sequence with a calibrated torque wrench rather than an impact tool.
Tools you need for a RAV4 brake job
Recorded socket sizes for 2007 Toyota RAV4: 17mm, 12mm, 14mm, 10mm. Other tools may include a caliper slide-pin tool or hex/Torx bit set, a torque wrench that covers the specified torque values, plus thread-locker or brake lubricant only where the manual calls for it. A caliper piston compressor makes seating the new pads far easier. See the recommended tools and replacement hardware linked below.
Related lookups
- 2007 Toyota RAV4 — Full Bolt & Torque Specs
- 2007 Toyota RAV4 Suspension & Steering Torque
- 2007 Toyota RAV4 Lug Nut Torque
- Standard Torque Specs by Grade
Loading interactive lookup…