2022 Toyota Tacoma Brake Job Torque Specs

Compare 4 named brake fastener records for 2022 Toyota Tacoma. These records are not a universal caliper mounting or bracket torque answer. Verify the exact part, axle, variant and source against the service manual. Full bolt records for the rest of the vehicle are linked below.

Caliper Bracket Bolts records — 2022 Toyota Tacoma

Recorded fastener names and fields for 2022 Toyota Tacoma: Front Brake Caliper Bracket Bolts — Gen2/Gen3 (torques to 91 ft-lbs (123 Nm), 19mm socket, M14 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

Caliper Slide / Guide Pins records — 2022 Toyota Tacoma

Recorded fastener names and fields for 2022 Toyota Tacoma: Front Caliper Slide Pin Bolts (torques to 25 ft-lbs (34 Nm), 12mm or 14mm depending on year socket, M10 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

Hydraulic (Banjo & Bleeder) records — 2022 Toyota Tacoma

Recorded fastener names and fields for 2022 Toyota Tacoma: Brake Line Union Nut (torques to 11 ft-lbs (15 Nm), 10mm flare wrench socket, 3/8" flare nut thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

Other Brake Fasteners records — 2022 Toyota Tacoma

Recorded fastener names and fields for 2022 Toyota Tacoma: ABS Wheel Speed Sensor Bolt (Brake System) (torques to 71 in-lbs (8 Nm), 10mm socket, M6 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

How to do a Tacoma brake job right

Consult the service manual for the exact axle and variant before starting. Identify the mounting bolts, bracket bolts and slide/guide pins separately. Bolt reuse, lubrication, threadlocker and torque-to-yield requirements are application-specific, not universal rules for a display group. Support the caliper safely without loading the hose, and use the specified tightening sequence with a calibrated torque wrench rather than an impact tool.

Tools you need for a Tacoma brake job

Recorded socket sizes for 2022 Toyota Tacoma: 19mm, 12mm or 14mm depending on year, 10mm, 10mm flare wrench. Other tools may include a caliper slide-pin tool or hex/Torx bit set, a torque wrench that covers the specified torque values, plus thread-locker or brake lubricant only where the manual calls for it. A caliper piston compressor makes seating the new pads far easier. See the recommended tools and replacement hardware linked below.

Related lookups

Loading interactive lookup…