2024 Honda Civic Lug Nut Torque Specs
The OEM lug nut torque for the 2024 Honda Civic is 80 ft-lbs (108 Nm); the Civic Type R uses 94 ft-lbs (127 Nm). Tighten in a star pattern in two passes — about half, then full — and re-check at the interval in your owner's manual. Full bolt and torque specs for the rest of the vehicle are linked below.
What is the lug nut torque for the 2024 Honda Civic?
The OEM-specified lug nut torque for the 2024 Honda Civic is 80 ft-lbs (108 Nm); the Civic Type R uses 94 ft-lbs (127 Nm). Use a calibrated torque wrench for the final pass — an impact gun cannot hit a precise value and is the most common cause of warped rotors and stretched studs. The clamp load settles as the wheel seats against the hub, so re-check at the interval in your owner's manual or the wheel maker's instructions.
What socket size fits the Civic lug nuts?
Measure across the flats of the lug nut to confirm the socket size, then use a 6-point impact-rated socket rather than a 12-point chrome socket to avoid rounding the nut.
How to torque the Civic wheels correctly
Thread every lug nut on by hand first to avoid cross-threading, then torque to the value for your exact trim (80 ft-lbs (108 Nm); Type R: 94 ft-lbs (127 Nm)) in a star (criss-cross) pattern across two passes — roughly 50% then 100%. Never run one nut down fully before the others; it cocks the wheel and warps the rotor. Lower the vehicle so the tire is loaded before the final pass, and re-check at the interval in your owner's manual.
Related lookups
- 2024 Honda Civic — Full Bolt & Torque Specs
- Wheel Lug Nut Torque Guide
- Standard Torque Specs by Grade
- Wrench & Socket Size Finder
Loading interactive lookup…