2024 Jeep Grand Cherokee Lug Nut Torque Specs
The OEM lug nut torque for the 2024 Jeep Grand Cherokee is 130 ft-lbs (176 Nm) on M14x1.5 thread studs. Tighten in a star pattern in two passes — about half, then full — and re-check after the first 50 to 100 miles. Full bolt and torque specs for the rest of the vehicle are linked below.
What is the lug nut torque for the 2024 Jeep Grand Cherokee?
The OEM-specified lug nut torque for the 2024 Jeep Grand Cherokee is 130 ft-lbs (176 Nm). Use a calibrated torque wrench for the final pass — an impact gun cannot hit a precise value and is the most common cause of warped rotors and stretched studs. The studs are M14x1.5 thread. Re-torque after the first 50 to 100 miles of driving, because the clamp load settles as the wheel seats against the hub.
What socket size fits the Grand Cherokee lug nuts?
Measure across the flats of the lug nut to confirm the socket size, then use a 6-point impact-rated socket rather than a 12-point chrome socket to avoid rounding the nut.
How to torque the Grand Cherokee wheels correctly
Thread every lug nut on by hand first to avoid cross-threading, then torque to 130 ft-lbs (176 Nm) in a star (criss-cross) pattern across two passes — roughly 50% then 100%. Never run one nut down fully before the others; it cocks the wheel and warps the rotor. Lower the vehicle so the tire is loaded before the final pass, and re-check after 50 to 100 miles.
Related lookups
- 2024 Jeep Grand Cherokee — Full Bolt & Torque Specs
- Wheel Lug Nut Torque Guide
- Standard Torque Specs by Grade
- Wrench & Socket Size Finder
Loading interactive lookup…