Husqvarna TS 248XD (Lawn Tractor) Blade Bolt Torque
The blade bolt torque on the Husqvarna TS 248XD (Lawn Tractor) is 45–55 ft-lb (62–75 N·m). Operator's Manual 1931-005-08.05.2023 (TS 248XD, 2023 edition), "To replace the blades", step 4, p.25: "Torque the bolt to 45–55 ft-lbs (62-75 Nm)." The manual's Technical data spec table lists no separate blade-bolt torque (only spark plug torque). Socket and thread size are not stated.
What's the exact spec for the Husqvarna TS 248XD (Lawn Tractor)?
Torque: 45–55 ft-lb (62–75 N·m). Threadlocker: Not called for in the Husqvarna operator's manuals cited below. Operator's Manual 1931-005-08.05.2023 (TS 248XD, 2023 edition), "To replace the blades", step 4, p.25: "Torque the bolt to 45–55 ft-lbs (62-75 Nm)." The manual's Technical data spec table lists no separate blade-bolt torque (only spark plug torque). Socket and thread size are not stated.
Step-by-step Husqvarna TS 248XD (Lawn Tractor) blade-bolt reinstall
1) Disconnect the spark plug and engage the parking brake. 2) Block the blade with a 2×4 wedged against the deck shell — never your hand. 3) Use a 1/2" drive breaker bar with an impact socket sized to the blade bolt to break the bolt loose. 4) Clean threads with brake cleaner and inspect the bolt for stretch. 5) Reinstall with no threadlocker. 6) Torque to 45–55 ft-lb (62–75 N·m) in one smooth pull with a calibrated torque wrench. 7) Re-check after the first hour of cutting.
Common Husqvarna TS 248XD (Lawn Tractor) blade-bolt mistakes
Over-torque past spec stretches the bolt past yield — it will not hold the next reinstall. Under-torque lets the blade walk loose at full RPM, which destroys the spindle key and balance. Using a 12-point socket on a rusted bolt rounds the head; always use 6-point. The YTH24V48 manual flags "SPECIAL BLADE BOLT IS HEAT TREATED" — replace it only with the Husqvarna part, and align the blade's centre hole with the star on the mandrel before tightening.
What socket fits the Husqvarna TS 248XD (Lawn Tractor) blade bolt?
A 6-point impact socket sized to the blade bolt — the manual doesn’t state an exact size, so confirm it against the bolt head before buying one on a 1/2" drive breaker bar. A 12-point socket can be used in a pinch on a clean, sharp-edged bolt head — never on a rusted bolt.
Related lookups
- All Husqvarna Blade Bolt Torque Specs
- All Mower Brand Blade Specs
- Wrench & Socket Size Finder
- Husqvarna YTH24V48 (24HP, 48" Deck) (45–55 ft-lb (62–75 N·m))
- Husqvarna Z254 (Zero-Turn, 54" Deck) (45–60 ft-lb (60–81 N·m))
- Husqvarna YTH1942 (Riding Lawn Tractor) (45–55 ft-lb (62–75 N·m))
- Husqvarna TS 142 (Riding Lawn Tractor) (45–55 ft-lb (62–75 N·m))
- Husqvarna LC221A (Self-Propelled Push Mower) (35–40 ft-lb (47–54 N·m))
Loading interactive lookup…