John Deere D130 (22HP, 42" Deck) Blade Bolt Torque
The blade bolt torque on the John Deere D130 (22HP, 42" Deck) is 65 lb-ft (88 N·m), using a 15/16" socket with a 5/8" nut. Blade NUT on a splined spindle shaft. Manual OMGX25410 (D100 Series), Installing Mower Blades (p.44), step 5: "Using 15/16 in. socket, tighten 5/8 in. blade nut to specifications. Mower Deck Blade Nut — Torque: 88 N·m (65 lb-ft)." Repeated in the 42-in deck spec table (p.54): "Blade Nut Torque (w/5/8 in. Nut) 88 N•m (65 lb-ft)." Thread pitch is not stated.
What's the exact spec for the John Deere D130 (22HP, 42" Deck)?
Torque: 65 lb-ft (88 N·m). Socket: 15/16". Thread: 5/8" nut. Threadlocker: Not called for in the Deere operator's manuals cited below. Blade NUT on a splined spindle shaft. Manual OMGX25410 (D100 Series), Installing Mower Blades (p.44), step 5: "Using 15/16 in. socket, tighten 5/8 in. blade nut to specifications. Mower Deck Blade Nut — Torque: 88 N·m (65 lb-ft)." Repeated in the 42-in deck spec table (p.54): "Blade Nut Torque (w/5/8 in. Nut) 88 N•m (65 lb-ft)." Thread pitch is not stated.
Step-by-step John Deere D130 (22HP, 42" Deck) blade-bolt reinstall
1) Disconnect the spark plug and engage the parking brake. 2) Block the blade with a 2×4 wedged against the deck shell — never your hand. 3) Use a 1/2" drive breaker bar with a 6-point 15/16" impact socket to break the bolt loose. 4) Clean threads with brake cleaner and inspect the bolt for stretch. 5) Reinstall with no threadlocker. 6) Torque to 65 lb-ft (88 N·m) in one smooth pull with a calibrated torque wrench. 7) Re-check after the first hour of cutting.
Common John Deere D130 (22HP, 42" Deck) blade-bolt mistakes
Over-torque past spec stretches the bolt past yield — it will not hold the next reinstall. Under-torque lets the blade walk loose at full RPM, which destroys the spindle key and balance. Using a 12-point socket on a rusted bolt rounds the head; always use 6-point. Deere lists two different fasteners across its lines — a blade NUT at 65 lb-ft (100 Series) and a blade BOLT/cap screw at 50 lb-ft (ZTrak, X300 42A/48A/54A) — so check which your deck has before setting the wrench. Install the washer cupped side toward the blade.
What socket fits the John Deere D130 (22HP, 42" Deck) blade bolt?
A 6-point 15/16" impact socket on a 1/2" drive breaker bar. A 12-point socket can be used in a pinch on a clean, sharp-edged bolt head — never on a rusted bolt.
Related lookups
- All John Deere Blade Bolt Torque Specs
- All Mower Brand Blade Specs
- Wrench & Socket Size Finder
- John Deere Z355E (ZTrak, 48" Deck) (50 lb-ft (68 N·m))
- John Deere X300 Select Series (38"/42" Edge Xtra Deck) (65 lb-ft (88 N·m))
- John Deere X350 Select Series (42A Deck) (50 lb-ft (68 N·m))
- John Deere S100 (100 Series Lawn Tractor) (65 lb-ft (88 N·m))
- John Deere S120 (100 Series Lawn Tractor) (65 lb-ft (88 N·m))
- John Deere E120 (E100 Series Lawn Tractor) (65 lb-ft (88 N·m))
- John Deere Z335E (ZTrak, 42A Deck) (50 lb-ft (68 N·m))
Loading interactive lookup…