Snapper Snapper Pro S200X 61" Zero-Turn (S200XKAV2761) Blade Bolt Torque
The blade bolt torque on the Snapper Snapper Pro S200X 61" Zero-Turn (S200XKAV2761) is 70 ft-lb (94 N·m). Snapper Pro S200X Series Zero-Turn Operator's Manual 5101090 Rev. C (cover lists 5900695 S200XKAV2761, 27HP Kawasaki, 61" cut), p.33, Reinstalling the Mower Blades: "Secure with the mower blade mounting bolt and flat washer (A & B, Figure 32) and torque to 70 ft. lbs (94 Nm)." Socket and thread size are not stated.
What's the exact spec for the Snapper Snapper Pro S200X 61" Zero-Turn (S200XKAV2761)?
Torque: 70 ft-lb (94 N·m). Threadlocker: Not called for in the Snapper manuals cited below. Snapper Pro S200X Series Zero-Turn Operator's Manual 5101090 Rev. C (cover lists 5900695 S200XKAV2761, 27HP Kawasaki, 61" cut), p.33, Reinstalling the Mower Blades: "Secure with the mower blade mounting bolt and flat washer (A & B, Figure 32) and torque to 70 ft. lbs (94 Nm)." Socket and thread size are not stated.
Step-by-step Snapper Snapper Pro S200X 61" Zero-Turn (S200XKAV2761) blade-bolt reinstall
1) Disconnect the spark plug and engage the parking brake. 2) Block the blade with a 2×4 wedged against the deck shell — never your hand. 3) Use a 1/2" drive breaker bar with an impact socket sized to the blade bolt to break the bolt loose. 4) Clean threads with brake cleaner and inspect the bolt for stretch. 5) Reinstall with no threadlocker. 6) Torque to 70 ft-lb (94 N·m) in one smooth pull with a calibrated torque wrench. 7) Re-check after the first hour of cutting.
Common Snapper Snapper Pro S200X 61" Zero-Turn (S200XKAV2761) blade-bolt mistakes
Over-torque past spec stretches the bolt past yield — it will not hold the next reinstall. Under-torque lets the blade walk loose at full RPM, which destroys the spindle key and balance. Using a 12-point socket on a rusted bolt rounds the head; always use 6-point. The RE-series manual has you check blade-bolt torque as a routine maintenance step, not only at blade changes — 30–40 ft-lb is low enough that these bolts deserve a periodic re-check.
What socket fits the Snapper Snapper Pro S200X 61" Zero-Turn (S200XKAV2761) blade bolt?
A 6-point impact socket sized to the blade bolt — the manual doesn’t state an exact size, so confirm it against the bolt head before buying one on a 1/2" drive breaker bar. A 12-point socket can be used in a pinch on a clean, sharp-edged bolt head — never on a rusted bolt.
Related lookups
- All Snapper Blade Bolt Torque Specs
- All Mower Brand Blade Specs
- Wrench & Socket Size Finder
- Snapper RE210 (Rear-Engine Rider, 33" Deck) (30–40 ft-lb)
Loading interactive lookup…