Toro TimeMaster 30in Lawn Mower Blade Bolt Torque
The blade bolt torque on the Toro TimeMaster 30in Lawn Mower is 60 ft-lb (82 N·m). Manual: "torque the blade bolt to 82 N∙m (60 ft-lb)." Right-hand (standard) thread — manual instructs removing the bolt counterclockwise. Socket size is not stated.
What's the exact spec for the Toro TimeMaster 30in Lawn Mower?
Torque: 60 ft-lb (82 N·m). Threadlocker: Not called for in the Toro operator's manuals cited below. Manual: "torque the blade bolt to 82 N∙m (60 ft-lb)." Right-hand (standard) thread — manual instructs removing the bolt counterclockwise. Socket size is not stated.
Step-by-step Toro TimeMaster 30in Lawn Mower blade-bolt reinstall
1) Disconnect the spark plug and engage the parking brake. 2) Block the blade with a 2×4 wedged against the deck shell — never your hand. 3) Use a 1/2" drive breaker bar with an impact socket sized to the blade bolt to break the bolt loose. 4) Clean threads with brake cleaner and inspect the bolt for stretch. 5) Reinstall with no threadlocker. 6) Torque to 60 ft-lb (82 N·m) in one smooth pull with a calibrated torque wrench. 7) Re-check after the first hour of cutting.
Common Toro TimeMaster 30in Lawn Mower blade-bolt mistakes
Over-torque past spec stretches the bolt past yield — it will not hold the next reinstall. Under-torque lets the blade walk loose at full RPM, which destroys the spindle key and balance. Using a 12-point socket on a rusted bolt rounds the head; always use 6-point. Toro manuals install the curved (cupped) washer with the cup side toward the blade, and the Recycler manual warns the 60 ft-lb bolt "is very tight" and "very difficult to overtighten" — put your weight behind the wrench while holding the blade with a block of wood.
What socket fits the Toro TimeMaster 30in Lawn Mower blade bolt?
A 6-point impact socket sized to the blade bolt — the manual doesn’t state an exact size, so confirm it against the bolt head before buying one on a 1/2" drive breaker bar. A 12-point socket can be used in a pinch on a clean, sharp-edged bolt head — never on a rusted bolt.
Related lookups
- All Toro Blade Bolt Torque Specs
- All Mower Brand Blade Specs
- Wrench & Socket Size Finder
- Toro TimeCutter (Residential Z-Turn) (35–65 ft-lb (SS/MX gen) or 60–80 ft-lb (75742 gen))
- Toro Recycler 22" Walk-Behind (60 ft-lb (82 N·m))
- Toro Recycler 21in Push Mower (60 ft-lb (82 N·m))
- Toro TimeCutter MX 5050 (Zero-Turn Riding Mower) (35–65 ft-lb)
- Toro Z Master Commercial 2000 Series (Zero-Turn) (85–110 ft-lb)
Loading interactive lookup…