2024 Hyundai Palisade Suspension & Steering Torque Specs

OEM-referenced torque, socket, and thread specs for the 17 front and rear suspension and steering fasteners on the 2024 Hyundai Palisade — including the Front Lower Control Arm to Subframe Bolt (front) (torques to 94 ft-lbs (128 Nm)). Every value is safety-critical; verify against your service manual and use a calibrated torque wrench. Full bolt specs for the rest of the vehicle are linked below.

Control Arms & Ball Joints torque — 2024 Hyundai Palisade

On the 2024 Hyundai Palisade, the control arms & ball joints fasteners are: Front Lower Control Arm to Subframe Bolt (front) (torques to 94 ft-lbs (128 Nm)); Front Lower Ball Joint to Knuckle Bolt (torques to 80 ft-lbs (108 Nm)); Rear Lower Arm Cam Bolt (torques to 108 ft-lbs (147 Nm)); Front Lower Control Arm to Subframe Bolt (rear) (torques to 123 ft-lbs (167 Nm)). Suspension and steering bolts are safety-critical — use a calibrated torque wrench, replace any prevailing-torque (locking) nut that has been removed, and confirm the value against your service manual before reassembly.

Struts, Shocks & Springs torque — 2024 Hyundai Palisade

On the 2024 Hyundai Palisade, the struts, shocks & springs fasteners are: Rear Shock Absorber Lower Bolt (torques to 108 ft-lbs (147 Nm)); Front Strut Top Mount Nut (torques to 38 ft-lbs (51 Nm)); Front Strut to Knuckle Bolt (torques to 123 ft-lbs (167 Nm)); Rear Shock Absorber Upper Bolt (torques to 108 ft-lbs (147 Nm)). Suspension and steering bolts are safety-critical — use a calibrated torque wrench, replace any prevailing-torque (locking) nut that has been removed, and confirm the value against your service manual before reassembly.

Sway Bar & Stabilizer Links torque — 2024 Hyundai Palisade

On the 2024 Hyundai Palisade, the sway bar & stabilizer links fasteners are: Front Sway Bar Link Lower Nut (torques to 80 ft-lbs (108 Nm)); Rear Sway Bar Bracket Bolt (torques to 36 ft-lbs (49 Nm)); Front Sway Bar Link Upper Nut (torques to 80 ft-lbs (108 Nm)); Front Sway Bar Bracket Bolt (torques to 42 ft-lbs (56 Nm)); Rear Sway Bar Link Nut (torques to 80 ft-lbs (108 Nm)). Suspension and steering bolts are safety-critical — use a calibrated torque wrench, replace any prevailing-torque (locking) nut that has been removed, and confirm the value against your service manual before reassembly.

Steering (Tie Rods & Linkage) torque — 2024 Hyundai Palisade

On the 2024 Hyundai Palisade, the steering (tie rods & linkage) fasteners are: Tie Rod End Jam Nut (torques to 38 ft-lbs (51 Nm)); Steering Gear to Subframe Bolt (torques to 72 ft-lbs (98 Nm)). Suspension and steering bolts are safety-critical — use a calibrated torque wrench, replace any prevailing-torque (locking) nut that has been removed, and confirm the value against your service manual before reassembly.

Other Suspension Fasteners torque — 2024 Hyundai Palisade

On the 2024 Hyundai Palisade, the other suspension fasteners fasteners are: Front Subframe Mounting Bolt (torques to 123 ft-lbs (167 Nm)); Rear Subframe Mounting Bolt (torques to 145 ft-lbs (196 Nm)). Suspension and steering bolts are safety-critical — use a calibrated torque wrench, replace any prevailing-torque (locking) nut that has been removed, and confirm the value against your service manual before reassembly.

How to torque Palisade suspension & steering fasteners

Torque suspension and steering fasteners with the vehicle at ride height (wheels loaded) wherever a bushing is involved — tightening a control-arm or sway-bar bushing bolt with the suspension hanging pre-loads the rubber and it fails early. Clean the threads, start every fastener by hand to avoid cross-threading, and make the final pass with a calibrated torque wrench rather than an impact gun. Ball-joint and tie-rod castle nuts take a new cotter pin; never back a castle nut off to line up the hole — only tighten to the next slot.

Related lookups

Loading interactive lookup…