2013 Acura Rdx Bolt Sizes & Torque Specs
Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.
This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2013 Acura Rdx. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.
Honda and Acura platforms often reuse lug-thread conventions across related models, but the socket and torque must come from this vehicle's own record. Do not substitute a common import socket size for a measured lug nut.
Common fastener categories on the 2013 Acura Rdx
- Wheel / lug nut torque and thread spec (covered above)
- Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
- Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
- Transmission pan, valve cover, and intake manifold bolts where the database has exact records
- Suspension control arm, sway bar, tie rod end and ball joint torque
- Spark plug torque only when a vehicle-specific spark-plug row is available
- Differential cover bolts (RWD/4WD only) and transfer case fasteners
Repair guidance for this model year
For 2013 model-year work: This era introduced widespread torque-to-yield (TTY) bolts on head, main, and crank pulley fasteners. TTY bolts stretch permanently when torqued and must not be reused — the spec calls for a fresh bolt every time. Always verify TTY status against the FSM before reassembly.
Tools you will need
- Metric socket set (8mm-22mm), 6-point impact-rated
- Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
- Breaker bar (24" minimum) for initial loosening
- Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
- Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them
Frequently asked questions
What is the lug nut torque on a 2013 Acura Rdx?
Specification not verified for this lug nut summary. Do not substitute another model year's value.
What socket size do I need for the 2013 Acura Rdx lug nuts?
Confirm the socket against the actual lug nut; no size is assumed here.
Are the 2013 Acura Rdx fasteners metric or SAE?
Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.
Other Acura Rdx years
Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.
- 2023 Acura Rdx lug nut torque
- 2022 Acura Rdx lug nut torque
- 2021 Acura Rdx lug nut torque
- 2020 Acura Rdx lug nut torque
- 2019 Acura Rdx lug nut torque
- 2018 Acura Rdx lug nut torque
- 2017 Acura Rdx lug nut torque
- 2016 Acura Rdx lug nut torque
- 2015 Acura Rdx lug nut torque
- 2014 Acura Rdx lug nut torque
- 2012 Acura Rdx lug nut torque
- 2011 Acura Rdx lug nut torque
- 2010 Acura Rdx lug nut torque
- 2009 Acura Rdx lug nut torque
- 2008 Acura Rdx lug nut torque
- 2007 Acura Rdx lug nut torque
→ 2013 Acura Rdx oil drain plug torque & size
All 2 2013 Acura Rdx fastener specs
Per-field evidence and legacy records for the 2013 Acura Rdx. A verified torque does not verify socket size, thread or part number. Unverified records are not installation instructions; conflicting specifications are withheld. 1 of the 2 records carry legacy review labels (last reviewed June 2026); those labels do not verify individual fields.
Wheels — 2013 Acura Rdx
Wheel and lug nut spec for the 2013 Acura Rdx. Lug Nut (All wheels). Torque: 80 ft-lbs (108 Nm) (legacy record, unverified). Socket size: not verified. Thread: M12x1.5 (legacy record, unverified). Part number: 90304-SA5-013 (legacy record, unverified).
Engine — 2013 Acura Rdx
Engine bolt-by-bolt torque for the 2013 Acura Rdx, including the long block, valve covers, and intake. Oil Drain Plug (Oil pan). Torque: 29 ft-lbs (39 Nm) (legacy record, unverified). Socket size: not verified. Thread: M14x1.5 (legacy record, unverified). Part number: 90009-R70-A00 (legacy record, unverified).
New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2013 Acura Rdx numbers above.
Loading the interactive 2013 Acura Rdx fastener lookup with per-bolt filtering, part links, and torque tools…