2021 Buick Enclave Lug Nut Torque & Bolt Specs

The source-backed 2021 Buick Enclave lug nut torque is 140 ft-lbs (190 Nm). Match the application and hardware conditions in the cited manual; do not assume the same value applies to aftermarket hardware.

Does this apply to my Enclave?

Checked for 2nd Gen trim — 140 ft-lbs (190 Nm) — against the 2021 Buick Enclave Owner's Manual, Wheel nut tightening torque (quoted).

This figure assumes: OEM wheels and lug nuts as specified in the owner's manual.

Aftermarket wheels or lug nuts: use the wheel or lug-nut maker's figure.

Lug nut torque: 140 ft-lbs (190 Nm).

Where these numbers come from

1 value for the 2021 Buick Enclave is checked against a maker’s document. Each row names the document, the page or section and the manual’s own wording, so you can check it yourself.

SpecValueDocument and pageManual wordingApplies to
Lug Nut — torque140 ft-lbs (190 Nm)2021 Buick Enclave Owner's Manual, Wheel nut tightening torque (quoted) · chevrolet.com“Wheel Nut Torque 190 Y 140 lb ft”OEM wheels and lug nuts as specified in the owner's manual. Applies to: trim: 2nd Gen (1 configuration).

Latest proof checked 2026-09-06. Values that changed after a check are listed in the corrections log.

Tools for this job

Matched to the specs on this page.

As an Amazon Associate I earn from qualifying purchases. Tool picks are general options, not a fit guarantee for your vehicle or fastener.

Every value on this page for the 2021 Buick Enclave names the document it was checked against. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

Frequently asked questions

What is the lug nut torque on a 2021 Buick Enclave?

The source-backed lug-nut torque for the 2021 Buick Enclave is 140 ft-lbs (190 Nm). Match the exact application, hardware and tightening conditions in the cited manual. Field evidence: Lug nut torque confirmed against 2021 Buick Enclave Owner's Manual, Wheel nut tightening torque (quoted) (https://www.chevrolet.com/ownercenter/content/dam/gmownercenter/gmna/dynamic/manuals/2021/buick/enclave/2021-buick-enclave-owners-manual.pdf). OEM wheels and lug nuts as specified in the owner's manual; trim: 2nd Gen.

Are the 2021 Buick Enclave fasteners metric or SAE?

Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.

Not yet verified for the 2021 Buick Enclave: lug nut socket size. Check your owner’s or service manual, or ask a dealer. Send a correction

Other Buick Enclave years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

Fasteners on record for the 2021 Buick Enclave

1 of the 2 fasteners on record for the 2021 Buick Enclave has at least one value checked against a maker’s document; each sentence below names it. A checked torque does not confirm the socket size, thread or part number. Where sources disagree, the value is withheld.

Wheels — 2021 Buick Enclave

Wheel fasteners checked against a maker’s document for the 2021 Buick Enclave. Lug Nut (All wheels). Torque: 140 ft-lbs (190 Nm). Source: 2021 Buick Enclave Owner's Manual, Wheel nut tightening torque (quoted). OEM wheels and lug nuts as specified in the owner's manual trim: 2nd Gen

Also on record but not yet checked against a maker’s document (1): Oil Drain Plug. Their stored figures are not shown until a document confirms them. Have the factory figure? Send a correction.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.

Loading the interactive 2021 Buick Enclave fastener lookup with per-bolt filtering, part links, and torque tools…