2009 Case 590sn Bolt Sizes & Torque Specs

Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.

This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2009 Case 590sn. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

For the 2009 Case 590sn, fasteners follow application-specific metric or SAE standards typical of mid-2000s Case engineering. Always confirm spec against the factory service manual before tightening safety-critical fasteners (suspension, brake, steering, head bolts).

Common fastener categories on the 2009 Case 590sn

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
Transmission pan, valve cover, and intake manifold bolts where the database has exact records
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque only when a vehicle-specific spark-plug row is available
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2009 model-year work: Always use a calibrated torque wrench for safety-critical fasteners, and replace lock washers and crush washers on every reassembly.

Tools you will need

Metric and SAE socket set (8mm-22mm plus 1/4"-7/8"), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them

Frequently asked questions

What is the lug nut torque on a 2009 Case 590sn?

Specification not verified for this lug nut summary. Do not substitute another model year's value.

What socket size do I need for the 2009 Case 590sn lug nuts?

Confirm the socket against the actual lug nut; no size is assumed here.

Are the 2009 Case 590sn fasteners metric or SAE?

Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.

Other Case 590sn years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2009 Case 590sn oil drain plug torque & size

7 recorded 2009 Case 590sn fasteners

Per-field evidence and legacy records for the 2009 Case 590sn. A verified torque does not verify socket size, thread or part number. Unverified records are not installation instructions; conflicting specifications are withheld. 2 of the 7 records carry legacy review labels (last reviewed June 2026); those labels do not verify individual fields.

Wheels — 2009 Case 590sn

Wheel fastener records and field evidence for the 2009 Case 590sn. Rear Wheel Lug Nut (Wheels). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Wheel Lug Nut (Wheels). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Engine — 2009 Case 590sn

Engine fastener records and field evidence for the 2009 Case 590sn. Engine Oil Drain Plug (Engine). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Body — 2009 Case 590sn

Body fasteners on the 2009 Case 590sn. ROPS Cab Mounting Bolt (Body). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Attachment — 2009 Case 590sn

Attachment fasteners on the 2009 Case 590sn. Stabilizer Leg Pin Retaining Bolt (Attachment). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Loader Boom Pivot Bolt (Attachment). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Backhoe Boom Pivot Bolt (Attachment). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.

Loading the interactive 2009 Case 590sn fastener lookup with per-bolt filtering, part links, and torque tools…