2008 Dodge Charger Bolt Sizes & Torque Specs

Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.

This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2008 Dodge Charger. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

Field evidence: Lug nut torque is not verified; no specification is assumed. Lug nut socket size is not verified; no specification is assumed. Lug nut thread size is not verified; no specification is assumed. Lug nut part number is not verified; no specification is assumed.

Jeep, Ram, Dodge and Chrysler hardware changes by platform and wheel design, so a Wrangler, minivan and heavy-duty truck cannot share a generic torque answer. Match the exact year/model row and preserve hub-centric or seat-style requirements.

Common fastener categories on the 2008 Dodge Charger

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
Transmission pan, valve cover, and intake manifold bolts where the database has exact records
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque only when a vehicle-specific spark-plug row is available
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2008 model-year work: Always use a calibrated torque wrench for safety-critical fasteners, and replace lock washers and crush washers on every reassembly.

Tools you will need

Metric and SAE socket set (8mm-22mm plus 1/4"-7/8"), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them

Frequently asked questions

What is the lug nut torque on a 2008 Dodge Charger?

Specification not verified for this lug nut summary. Do not substitute another model year's value. Field evidence: Lug nut torque is not verified; no specification is assumed. Lug nut socket size is not verified; no specification is assumed. Lug nut thread size is not verified; no specification is assumed. Lug nut part number is not verified; no specification is assumed.

What socket size do I need for the 2008 Dodge Charger lug nuts?

Confirm the socket against the actual lug nut; no size is assumed here.

Are the 2008 Dodge Charger fasteners metric or SAE?

Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.

Other Dodge Charger years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2008 Dodge Charger suspension & steering torque specs (control arm, ball joint, tie rod)

→ 2008 Dodge Charger axle nut torque spec (CV axle & hub nut)

33 recorded 2008 Dodge Charger fasteners

Per-field evidence and legacy records for the 2008 Dodge Charger. A verified torque does not verify socket size, thread or part number. Unverified records are not installation instructions; conflicting specifications are withheld.

Wheels — 2008 Dodge Charger

Wheel fastener records and field evidence for the 2008 Dodge Charger. Lug Nut. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Brakes — 2008 Dodge Charger

Brake fastener records and field evidence for the 2008 Dodge Charger. Front Caliper Bracket Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Caliper Guide Pin Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Caliper Guide Pin Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Caliper Bracket Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Engine — 2008 Dodge Charger

Engine fastener records and field evidence for the 2008 Dodge Charger. Valve Cover Bolt (5.7 HEMI). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Engine Mount Through Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Drivetrain — 2008 Dodge Charger

Drivetrain fastener records and field evidence for the 2008 Dodge Charger. Driveshaft to Axle Flange Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Axle Hub Nut (RWD). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Transmission Mount to Transmission Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Differential Cover Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Axle Hub Nut (AWD). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Axle Hub Nut. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Suspension — 2008 Dodge Charger

Suspension fastener records and field evidence for the 2008 Dodge Charger. Front Shock Absorber Shaft Nut. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Shock Absorber Lower Nut. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Toe Link Knuckle Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Tension Strut Ball Joint Nut. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Shock Absorber Lower Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Hub Bearing Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Shock Absorber Upper Nut. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Camber Link Knuckle Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Sway Bar Link Nut. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Tension Link Knuckle Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Upper Control Arm Frame Nut. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Upper Ball Joint Nut. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Lower Ball Joint Nut. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Sway Bar Link Nut. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Spring Link Knuckle Nut. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Lower Control Arm Cradle Nut. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Compression Link Knuckle Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Shock Absorber Upper Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Steering — 2008 Dodge Charger

Steering linkage fasteners on the 2008 Dodge Charger. Outer Tie Rod End Nut. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Steering Gear Mounting Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.

Loading the interactive 2008 Dodge Charger fastener lookup with per-bolt filtering, part links, and torque tools…