2016 Ford F 250 Super Duty Bolt Sizes & Torque Specs

Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.

This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2016 Ford F 250 Super Duty. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

Ford torque and wheel-hardware specs vary sharply by chassis, especially between passenger cars, half-ton trucks and Super Duty trucks. Match the exact application and resolve source conflicts before tightening; a legacy database row is not authoritative evidence.

Common fastener categories on the 2016 Ford F 250 Super Duty

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
Transmission pan, valve cover, and intake manifold bolts where the database has exact records
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque only when a vehicle-specific spark-plug row is available
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2016 model-year work: This era introduced widespread torque-to-yield (TTY) bolts on head, main, and crank pulley fasteners. TTY bolts stretch permanently when torqued and must not be reused — the spec calls for a fresh bolt every time. Always verify TTY status against the FSM before reassembly.

Tools you will need

Metric socket set (8mm-22mm), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them

Frequently asked questions

What is the lug nut torque on a 2016 Ford F 250 Super Duty?

Specification not verified for this lug nut summary. Do not substitute another model year's value.

What socket size do I need for the 2016 Ford F 250 Super Duty lug nuts?

Confirm the socket against the actual lug nut; no size is assumed here.

Are the 2016 Ford F 250 Super Duty fasteners metric or SAE?

Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.

Other Ford F 250 Super Duty years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2016 Ford F 250 Super Duty oil drain plug torque & size

→ 2016 Ford F 250 Super Duty suspension & steering torque specs (control arm, ball joint, tie rod)

→ 2016 Ford F 250 Super Duty engine & transmission mount torque specs

All 128 2016 Ford F 250 Super Duty fastener specs

Per-field evidence and legacy records for the 2016 Ford F 250 Super Duty. A verified torque does not verify socket size, thread or part number. Unverified records are not installation instructions; conflicting specifications are withheld.

Wheels — 2016 Ford F 250 Super Duty

Wheel and lug nut spec for the 2016 Ford F 250 Super Duty. Wheel Speed Sensor Bolt - Rear Right (Wheel Speed Sensor). Torque: 8 ft-lbs (legacy record, unverified). Socket size: 8mm (legacy record, unverified). Thread: M6x1.0 (legacy record, unverified). Part number: not verified. Hub Bearing Bolt - Front Right (Wheel Hub). Torque: 65 ft-lbs (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M12x1.75 (legacy record, unverified). Part number: not verified. Hub Bearing Bolt - Rear Left (Wheel Hub). Torque: 65 ft-lbs (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M12x1.75 (legacy record, unverified). Part number: not verified. Hub Bearing Bolt - Rear Right (Wheel Hub). Torque: 65 ft-lbs (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M12x1.75 (legacy record, unverified). Part number: not verified. Wheel Speed Sensor Bolt - Front Right (Wheel Speed Sensor). Torque: 8 ft-lbs (legacy record, unverified). Socket size: 8mm (legacy record, unverified). Thread: M6x1.0 (legacy record, unverified). Part number: not verified. Hub Bearing Bolt - Front Left (Wheel Hub). Torque: 65 ft-lbs (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M12x1.75 (legacy record, unverified). Part number: not verified. Lug Nut (Wheel Hub). Torque: 165 ft-lbs (224 Nm) (legacy record, unverified). Socket size: 22mm (legacy record, unverified). Thread: M14x1.5 (legacy record, unverified). Part number: 2C2Z-1012-AA (legacy record, unverified). Wheel Lug Nut (Wheel Hub). Torque: 165 ft-lbs (224 Nm) (legacy record, unverified). Socket size: 21mm (legacy record, unverified). Thread: M14x1.5 (legacy record, unverified). Part number: not verified. Wheel Speed Sensor Bolt - Front Left (Wheel Speed Sensor). Torque: 8 ft-lbs (legacy record, unverified). Socket size: 8mm (legacy record, unverified). Thread: M6x1.0 (legacy record, unverified). Part number: not verified. Wheel Speed Sensor Bolt - Rear Left (Wheel Speed Sensor). Torque: 8 ft-lbs (legacy record, unverified). Socket size: 8mm (legacy record, unverified). Thread: M6x1.0 (legacy record, unverified). Part number: not verified.

Brakes — 2016 Ford F 250 Super Duty

Brake fasteners on the 2016 Ford F 250 Super Duty — caliper bracket, slide pins, and banjo bolt torque follow. Caliper Slide Pin - Front Right Upper (Caliper Slide). Torque: 25 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Caliper Slide Pin - Front Left Upper (Caliper Slide). Torque: 25 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Caliper Slide Pin - Front Left Lower (Caliper Slide). Torque: 25 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Caliper Slide Pin - Front Right Lower (Caliper Slide). Torque: 25 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Front Brake Caliper Slide Pin (Front Axle - Caliper). Torque: 21-26 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Brake Line Fitting - Front Right (Brake Line). Torque: 12 ft-lbs (legacy record, unverified). Socket size: 11mm (legacy record, unverified). Thread: M10x1.0 (legacy record, unverified). Part number: not verified. Caliper Bracket Bolt - Front Right Upper (Caliper Bracket). Torque: 85 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x1.5 (legacy record, unverified). Part number: not verified. Brake Line Fitting - Rear Right (Brake Line). Torque: 12 ft-lbs (legacy record, unverified). Socket size: 11mm (legacy record, unverified). Thread: M10x1.0 (legacy record, unverified). Part number: not verified. Caliper Bracket Bolt - Rear Right Upper (Caliper Bracket). Torque: 85 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x1.5 (legacy record, unverified). Part number: not verified. Caliper Bracket Bolt - Rear Left Lower (Caliper Bracket). Torque: 85 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x1.5 (legacy record, unverified). Part number: not verified. Caliper Bracket Bolt - Front Right Lower (Caliper Bracket). Torque: 85 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x1.5 (legacy record, unverified). Part number: not verified. Brake Line Fitting - Front Left (Brake Line). Torque: 12 ft-lbs (legacy record, unverified). Socket size: 11mm (legacy record, unverified). Thread: M10x1.0 (legacy record, unverified). Part number: not verified. Caliper Bracket Bolt - Front Left Upper (Caliper Bracket). Torque: 85 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x1.5 (legacy record, unverified). Part number: not verified. Caliper Bracket Bolt - Rear Right Lower (Caliper Bracket). Torque: 85 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x1.5 (legacy record, unverified). Part number: not verified. Caliper Bracket Bolt - Front Left Lower (Caliper Bracket). Torque: 85 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x1.5 (legacy record, unverified). Part number: not verified. Caliper Bracket Bolt - Rear Left Upper (Caliper Bracket). Torque: 85 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x1.5 (legacy record, unverified). Part number: not verified. Brake Line Fitting - Rear Left (Brake Line). Torque: 12 ft-lbs (legacy record, unverified). Socket size: 11mm (legacy record, unverified). Thread: M10x1.0 (legacy record, unverified). Part number: not verified. Front Brake Caliper Bracket Bolt (Front Axle - Caliper Bracket). Torque: 166-228 ft-lbs (legacy record, unverified). Socket size: 21mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified.

Engine — 2016 Ford F 250 Super Duty

Engine bolt-by-bolt torque for the 2016 Ford F 250 Super Duty, including the long block, valve covers, and intake. Cylinder Head Bolt - Front Left (Cylinder Head). Torque: 65 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Exhaust Manifold Stud - Front (Exhaust Manifold). Torque: 25 ft-lbs (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Cylinder Head Bolt - Rear Left (Cylinder Head). Torque: 65 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Timing Cover Bolt - Lower (Timing Cover). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Water Pump Bolt - Side (Water Pump). Torque: 18 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Oil Pan Bolt - Rear Left (Oil Pan). Torque: 18 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Alternator Bolt - Adjuster (Alternator Bracket). Torque: 30 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Starter Bolt - Lower (Starter Motor). Torque: 35 ft-lbs (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M12x1.75 (legacy record, unverified). Part number: not verified. Engine Oil Drain Plug. Torque: 20 ft-lbs (27 Nm) (legacy record, unverified). Socket size: 3/8in ratchet (legacy record, unverified). Thread: M12x1.75 (legacy record, unverified). Part number: EJ7Z-6730-B (legacy record, unverified). Intake Manifold Bolt - Right (Intake Manifold). Torque: 18 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Exhaust Manifold Stud - Rear (Exhaust Manifold). Torque: 25 ft-lbs (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Water Pump Bolt - Upper (Water Pump). Torque: 18 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Timing Cover Bolt - Upper (Timing Cover). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Exhaust Manifold Stud - Center (Exhaust Manifold). Torque: 25 ft-lbs (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Valve Cover Bolt - Right Side (Valve Cover). Torque: 8 ft-lbs (legacy record, unverified). Socket size: 8mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Alternator Bolt - Lower (Alternator Bracket). Torque: 30 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Intake Manifold Bolt - Center (Intake Manifold). Torque: 18 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Intake Manifold Bolt - Left (Intake Manifold). Torque: 18 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Valve Cover Bolt - Rear (Valve Cover). Torque: 8 ft-lbs (legacy record, unverified). Socket size: 8mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Water Pump Bolt - Lower (Water Pump). Torque: 18 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Oil Pan Bolt - Front Left (Oil Pan). Torque: 18 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Cylinder Head Bolt - Rear Right (Cylinder Head). Torque: 65 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Alternator Bolt - Upper (Alternator Bracket). Torque: 30 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Timing Cover Bolt - Side (Timing Cover). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Oil Pan Bolt - Side (Oil Pan). Torque: 18 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Motor Mount Bolt - Rear (Engine Mount). Torque: 75 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified. Valve Cover Bolt - Center (Valve Cover). Torque: 8 ft-lbs (legacy record, unverified). Socket size: 8mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Oil Drain Plug (M15x1.5) (Oil Pan). Torque: 25-30 ft-lbs (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M15x1.5 (legacy record, unverified). Part number: F81Z-6730-AA (legacy record, unverified). Intake Manifold Bolt - Front (Intake Manifold). Torque: 18 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Oil Pan Bolt - Front Right (Oil Pan). Torque: 18 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Oil Pan Bolt - Rear Right (Oil Pan). Torque: 18 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Motor Mount Bolt - Front Right (Engine Mount). Torque: 75 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified. Intake Manifold Bolt - Rear (Intake Manifold). Torque: 18 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Cylinder Head Bolt - Center (Cylinder Head). Torque: 65 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Valve Cover Bolt - Front (Valve Cover). Torque: 8 ft-lbs (legacy record, unverified). Socket size: 8mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Valve Cover Bolt - Left Side (Valve Cover). Torque: 8 ft-lbs (legacy record, unverified). Socket size: 8mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Cylinder Head Bolt - Front Right (Cylinder Head). Torque: 65 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Starter Bolt - Upper (Starter Motor). Torque: 35 ft-lbs (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M12x1.75 (legacy record, unverified). Part number: not verified. Motor Mount Bolt - Front Left (Engine Mount). Torque: 75 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified.

Drivetrain — 2016 Ford F 250 Super Duty

Drivetrain and driveline fasteners for the 2016 Ford F 250 Super Duty — axle, transmission, and differential plugs. Differential Drain/Fill Plug (Front & Rear Differential). Torque: 15-30 ft-lbs (legacy record, unverified). Socket size: 3/8" sq drive (legacy record, unverified). Thread: 3/8" square drive (legacy record, unverified). Part number: not verified. Transfer Case Drain Plug (Transfer Case). Torque: 14-22 ft-lbs (legacy record, unverified). Socket size: 24mm (legacy record, unverified). Thread: M18x1.5 (legacy record, unverified). Part number: not verified. Transmission Pan Bolt (Transmission Pan). Torque: 8-12 ft-lbs (legacy record, unverified). Socket size: 8mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified.

Suspension — 2016 Ford F 250 Super Duty

Suspension and chassis fastener torque for the 2016 Ford F 250 Super Duty — strut, control arm, and sway bar values. Sway Bar Bushing Bracket - Rear Left (Sway Bar Bushing). Torque: 25 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Control Arm Bolt - Rear Outer (Control Arm). Torque: 125 ft-lbs (legacy record, unverified). Socket size: 21mm (legacy record, unverified). Thread: M16x2.0 (legacy record, unverified). Part number: not verified. Sway Bar Bushing Bracket - Front Right (Sway Bar Bushing). Torque: 25 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Strut Mount Bolt - Rear Right (Strut Top Mount). Torque: 50 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified. Ball Joint Nut - Front Right (Ball Joint). Torque: 80 ft-lbs (legacy record, unverified). Socket size: 19mm (legacy record, unverified). Thread: M14x1.5 (legacy record, unverified). Part number: not verified. Leaf Spring U-Bolt - Rear Left (Leaf Spring). Torque: 90 ft-lbs (legacy record, unverified). Socket size: 19mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified. Strut Mount Bolt - Rear Left (Strut Top Mount). Torque: 50 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified. Control Arm Bolt - Front Outer (Control Arm). Torque: 125 ft-lbs (legacy record, unverified). Socket size: 21mm (legacy record, unverified). Thread: M16x2.0 (legacy record, unverified). Part number: not verified. Sway Bar Link Nut - Rear Right (Sway Bar Link). Torque: 59 ft-lbs (80 Nm) (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Strut Mount Bolt - Front Left (Strut Top Mount). Torque: 50 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified. Leaf Spring U-Bolt - Front Left (Leaf Spring). Torque: 90 ft-lbs (legacy record, unverified). Socket size: 19mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified. Control Arm Bolt - Rear Inner (Control Arm). Torque: 125 ft-lbs (legacy record, unverified). Socket size: 21mm (legacy record, unverified). Thread: M16x2.0 (legacy record, unverified). Part number: not verified. Strut Mount Bolt - Front Right (Strut Top Mount). Torque: 50 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified. Sway Bar Bushing Bracket - Rear Right (Sway Bar Bushing). Torque: 25 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Leaf Spring U-Bolt - Rear Right (Leaf Spring). Torque: 90 ft-lbs (legacy record, unverified). Socket size: 19mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified. Sway Bar Link Nut - Rear Left (Sway Bar Link). Torque: 59 ft-lbs (80 Nm) (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Sway Bar Link Nut - Front Right (Sway Bar Link). Torque: 59 ft-lbs (80 Nm) (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Shock Absorber Bolt - Upper (Shock Absorber). Torque: 45 ft-lbs (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M12x1.75 (legacy record, unverified). Part number: not verified. Sway Bar Bushing Bracket - Front Left (Sway Bar Bushing). Torque: 25 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Control Arm Bolt - Front Inner (Control Arm). Torque: 125 ft-lbs (legacy record, unverified). Socket size: 21mm (legacy record, unverified). Thread: M16x2.0 (legacy record, unverified). Part number: not verified. Sway Bar Link Nut - Front Left (Sway Bar Link). Torque: 59 ft-lbs (80 Nm) (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Shock Absorber Bolt - Lower (Shock Absorber). Torque: 45 ft-lbs (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M12x1.75 (legacy record, unverified). Part number: not verified. Leaf Spring U-Bolt - Front Right (Leaf Spring). Torque: 90 ft-lbs (legacy record, unverified). Socket size: 19mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified. Ball Joint Nut - Front Left (Ball Joint). Torque: 80 ft-lbs (legacy record, unverified). Socket size: 19mm (legacy record, unverified). Thread: M14x1.5 (legacy record, unverified). Part number: not verified.

Body — 2016 Ford F 250 Super Duty

Body fasteners on the 2016 Ford F 250 Super Duty. Miscellaneous Fastener 114 (Various). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Miscellaneous Fastener 118 (Various). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Miscellaneous Fastener 110 (Various). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Miscellaneous Fastener 117 (Various). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Miscellaneous Fastener 113 (Various). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Miscellaneous Fastener 109 (Various). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Miscellaneous Fastener 119 (Various). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Miscellaneous Fastener 111 (Various). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Miscellaneous Fastener 115 (Various). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Miscellaneous Fastener 116 (Various). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Miscellaneous Fastener 112 (Various). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Miscellaneous Fastener 120 (Various). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified.

Transmission — 2016 Ford F 250 Super Duty

Transmission fasteners on the 2016 Ford F 250 Super Duty. Transmission Pan Bolt - Right (Transmission Pan). Torque: 12 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Shift Linkage Bolt - Upper (Shift Linkage). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Cooler Line Fitting - Inlet (Transmission Cooler). Torque: 20 ft-lbs (legacy record, unverified). Socket size: 14mm (legacy record, unverified). Thread: M12x1.5 (legacy record, unverified). Part number: not verified. Bell Housing Bolt - Lower (Bell Housing). Torque: 55 ft-lbs (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M12x1.75 (legacy record, unverified). Part number: not verified. Transmission Pan Bolt - Corner (Transmission Pan). Torque: 12 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Bell Housing Bolt - Upper (Bell Housing). Torque: 55 ft-lbs (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M12x1.75 (legacy record, unverified). Part number: not verified. Cooler Line Fitting - Outlet (Transmission Cooler). Torque: 20 ft-lbs (legacy record, unverified). Socket size: 14mm (legacy record, unverified). Thread: M12x1.5 (legacy record, unverified). Part number: not verified. Bell Housing Bolt - Side (Bell Housing). Torque: 55 ft-lbs (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M12x1.75 (legacy record, unverified). Part number: not verified. Shift Linkage Bolt - Pivot (Shift Linkage). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Shift Linkage Bolt - Lower (Shift Linkage). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Transmission Mount Bolt - Cross Member (Transmission Mount). Torque: 65 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified. Transmission Mount Bolt - Rear (Transmission Mount). Torque: 65 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified. Transmission Pan Bolt - Front (Transmission Pan). Torque: 12 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Transmission Mount Bolt - Front (Transmission Mount). Torque: 65 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified. Transmission Pan Bolt - Rear (Transmission Pan). Torque: 12 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Transmission Pan Bolt - Left (Transmission Pan). Torque: 12 ft-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified.

Suspension & Steering — 2016 Ford F 250 Super Duty

Suspension & Steering fasteners on the 2016 Ford F 250 Super Duty. Rear Leaf Spring U-Bolt Nut (Rear Suspension - Leaf Spring). Torque: 148-202 ft-lbs (legacy record, unverified). Socket size: 22mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified. Front Hub/Wheel Bearing Nut (Front Axle Hub). Torque: 482-610 ft-lbs (legacy record, unverified). Socket size: Special hub nut socket (legacy record, unverified). Thread: M34x1.5 (legacy record, unverified). Part number: not verified. Tie Rod End Nut (Front Steering - Tie Rod End). Torque: 52-75 ft-lbs (legacy record, unverified). Socket size: 22mm (legacy record, unverified). Thread: M14x1.5 (legacy record, unverified). Part number: not verified.

Engine - Lubrication — 2016 Ford F 250 Super Duty

Engine - Lubrication fasteners on the 2016 Ford F 250 Super Duty. Oil Drain Plug (Oil Pan). Torque: 32 ft-lbs (44 Nm) (legacy record, unverified). Socket size: 17mm (legacy record, unverified). Thread: M14x1.5 (legacy record, unverified). Part number: F75Z-6730-BA (legacy record, unverified).

Engine - Ignition — 2016 Ford F 250 Super Duty

Engine - Ignition fasteners on the 2016 Ford F 250 Super Duty. Spark Plug (Cylinder Head). Torque: 26-30 ft-lbs (legacy record, unverified). Socket size: 9/16" (legacy record, unverified). Thread: M14x1.25 (legacy record, unverified). Part number: not verified.

Fuel System — 2016 Ford F 250 Super Duty

Fuel System fasteners on the 2016 Ford F 250 Super Duty. Fuel Filter Housing Bolt (Fuel Filter Housing). Torque: 18-22 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: BC3Z-9N184-A (legacy record, unverified).

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2016 Ford F 250 Super Duty numbers above.

Loading the interactive 2016 Ford F 250 Super Duty fastener lookup with per-bolt filtering, part links, and torque tools…