2010–2017 GMC Terrain Lug Nut Torque & Bolt Specs

The 2017 GMC Terrain lug nut torque is 140 ft-lbs (190 Nm) on M14x1.5 studs. Torque in a star pattern in two passes (snug, then final), and re-check after the first 50–100 miles of driving. Use a calibrated torque wrench — not an impact gun — for the final pass. The wheel bolt pattern is 5x120.

Lug nut torque: 140 ft-lbs (190 Nm) · Thread: M14x1.5 · Bolt pattern: 5x120.

This page is the OEM-referenced fastener summary for the 2017 GMC Terrain. Use it before any maintenance or repair job where torque values matter — brake work, wheel changes, suspension service, engine teardowns, or oil changes. Specs are pulled from manufacturer service literature, cross-checked against community data, and updated as new chassis variants become available.

These specifications also apply to the 2010–2016 model years — identical specs on file for each year.

GM lug-nut torque clusters around 140 ft-lbs (190 Nm) for half-ton Silverado/Sierra and 100 ft-lbs for passenger cars like Malibu, Impala, and Cruze. GM heavy-duty trucks (2500HD/3500HD) jump to 165 ft-lbs. Most GM passenger cars use a 19mm socket; trucks moved from 22mm to 22mm-with-deep-well in 2014. Watch for GM's flat-flange lug nut design on the Silverado — the standard cone-seat aftermarket lugs will not seat correctly.

Common fastener categories on the 2017 GMC Terrain

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket bolts (typically 80-130 ft-lbs) and slide/guide pins (18-35 ft-lbs)
Engine oil drain plug torque — rarely above 30 ft-lbs; always use a new crush washer
Transmission pan, valve cover, and intake manifold bolts (low torque, often 89-106 in-lbs)
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque (typically 10-15 ft-lbs on aluminum heads — do not exceed)
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2017 model-year work: This era introduced widespread torque-to-yield (TTY) bolts on head, main, and crank pulley fasteners. TTY bolts stretch permanently when torqued and must not be reused — the spec calls for a fresh bolt every time. Always verify TTY status against the FSM before reassembly.

Tools you will need

Metric socket set (8mm-22mm), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Anti-seize on stainless or dissimilar-metal threads; thread-locker (Loctite blue) on critical reassembly

Frequently asked questions

What is the lug nut torque on a 2017 GMC Terrain?

The OEM-specified lug-nut torque for the 2017 GMC Terrain is 140 ft-lbs (190 Nm) on M14x1.5 thread studs. Use a calibrated torque wrench in a star pattern, in two passes (50% and 100%), and re-check after 50-100 miles of driving.

What socket size do I need for the 2017 GMC Terrain lug nuts?

Most modern GMC vehicles use a 19mm or 21mm socket. Older GMC models from before 2000 may use a 13/16" SAE socket on certain trims. Confirm against the actual lug before purchasing aftermarket wheels.

Are the 2017 GMC Terrain fasteners metric or SAE?

Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.

Other GMC Terrain years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2017 GMC Terrain suspension & steering torque specs (control arm, ball joint, tie rod)

All 33 2017 GMC Terrain fastener specs

Per-bolt torque, wrench size, and thread spec for the 2017 GMC Terrain, sourced from OEM service literature and verified against community shop data. Values pair imperial (ft-lb) and metric (Nm) where the manufacturer publishes both.

Wheels — 2017 GMC Terrain

Wheel and lug nut spec for the 2017 GMC Terrain. Lug nut tightens to 140 ft-lbs (190 Nm), runs on M14x1.5 threads.

Brakes — 2017 GMC Terrain

Brake fasteners on the 2017 GMC Terrain — caliper bracket, slide pins, and banjo bolt torque follow. The front caliper bracket bolt, torqued to 140 ft-lbs (190 Nm). The brake caliper guide pin bolt torques to 20 ft-lbs (27 Nm). plan for the right driver; final torque is 92 ft-lbs (125 Nm) (rear caliper bracket bolt).

Engine — 2017 GMC Terrain

Engine bolt-by-bolt torque for the 2017 GMC Terrain, including the long block, valve covers, and intake. The oil filter cap torques to 22 ft-lbs (30 Nm). plan for the right driver; final torque is 7 ft-lbs (10 Nm) (valve cover bolt). Engine mount to engine bolt tightens to 74 ft-lbs (100 Nm). The engine mount to body bolt, torqued to 46 ft-lbs (62 Nm).

Drivetrain — 2017 GMC Terrain

Drivetrain and driveline fasteners for the 2017 GMC Terrain — axle, transmission, and differential plugs. plan for the right driver; final torque is 151 ft-lbs (205 Nm) (front axle hub nut).

Suspension — 2017 GMC Terrain

Suspension and chassis fastener torque for the 2017 GMC Terrain — strut, control arm, and sway bar values. Rear lower control arm bolt tightens to 118 ft-lbs (160 Nm). The rear toe link bolt, torqued to 118 ft-lbs (160 Nm). The rear upper control arm to support bolt torques to 121 ft-lbs (164 Nm). plan for the right driver; final torque is 136 ft-lbs (185 Nm) (front strut to knuckle bolt). Rear sway bar link to shaft nut tightens to 70 ft-lbs (95 Nm). The rear shock absorber lower bolt, torqued to 81 ft-lbs (110 Nm). The front sway bar bracket bolt torques to 37 ft-lbs (50 Nm). plan for the right driver; final torque is 125 ft-lbs (170 Nm) (rear subframe to body bolt). Front lower control arm rear bolt tightens to 52 ft-lbs (70 Nm). The rear trailing arm bolt, torqued to 81 ft-lbs (110 Nm). The front strut top mount bolt torques to 18 ft-lbs (25 Nm). plan for the right driver; final torque is 81 ft-lbs (110 Nm) (rear shock absorber upper bolt). Rear trailing arm bracket to knuckle bolt tightens to 110 ft-lbs (150 Nm). The front sway bar link upper nut, torqued to 63 ft-lbs (85 Nm). The front lower ball joint to knuckle nut torques to 7 ft-lbs (10 Nm) + 165 deg. plan for the right driver; final torque is 52 ft-lbs (70 Nm) (rear wheel hub to knuckle bolt). Rear upper control arm to knuckle bolt tightens to 118 ft-lbs (160 Nm). The front strut shaft nut, torqued to 41 ft-lbs (55 Nm). The front wheel hub to knuckle bolt torques to 74 ft-lbs (100 Nm). plan for the right driver; final torque is 85 ft-lbs (115 Nm) (front lower control arm front bolt). Front lower control arm rear bushing nut tightens to 110 ft-lbs (150 Nm). The front sway bar link lower nut, torqued to 55 ft-lbs (75 Nm).

Steering — 2017 GMC Terrain

Steering linkage fasteners on the 2017 GMC Terrain. The outer tie rod end nut, torqued to 44 ft-lbs (60 Nm). The steering gear to cradle bolt torques to 81 ft-lbs (110 Nm).

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2017 GMC Terrain numbers above.

Loading the interactive 2017 GMC Terrain fastener lookup with per-bolt filtering, part links, and torque tools…