2002–2006 Honda CR-V Bolt Sizes & Torque Specs
Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.
This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2006 Honda CR-V. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.
These specifications also apply to the 2002, 2003, 2004 and 2005 model years — identical specs on file for each year.
Field evidence: Lug nut torque is not verified; no specification is assumed. Lug nut socket size is not verified; no specification is assumed. Lug nut thread size is not verified; no specification is assumed. Lug nut part number is not verified; no specification is assumed.
Honda and Acura platforms often reuse lug-thread conventions across related models, but the socket and torque must come from this vehicle's own record. Do not substitute a common import socket size for a measured lug nut.
Common fastener categories on the 2006 Honda CR-V
- Wheel / lug nut torque and thread spec (covered above)
- Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
- Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
- Transmission pan, valve cover, and intake manifold bolts where the database has exact records
- Suspension control arm, sway bar, tie rod end and ball joint torque
- Spark plug torque only when a vehicle-specific spark-plug row is available
- Differential cover bolts (RWD/4WD only) and transfer case fasteners
Repair guidance for this model year
For 2006 model-year work: Always use a calibrated torque wrench for safety-critical fasteners, and replace lock washers and crush washers on every reassembly.
Tools you will need
- Metric and SAE socket set (8mm-22mm plus 1/4"-7/8"), 6-point impact-rated
- Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
- Breaker bar (24" minimum) for initial loosening
- Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
- Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them
Frequently asked questions
What is the lug nut torque on a 2006 Honda CR-V?
Specification not verified for this lug nut summary. Do not substitute another model year's value. Field evidence: Lug nut torque is not verified; no specification is assumed. Lug nut socket size is not verified; no specification is assumed. Lug nut thread size is not verified; no specification is assumed. Lug nut part number is not verified; no specification is assumed.
What socket size do I need for the 2006 Honda CR-V lug nuts?
Confirm the socket against the actual lug nut; no size is assumed here.
Are the 2006 Honda CR-V fasteners metric or SAE?
Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.
Other Honda CR-V years
Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.
- 2014 Honda CR-V lug nut torque
- 2013 Honda CR-V lug nut torque
- 2012 Honda CR-V lug nut torque
- 2011 Honda CR-V lug nut torque
- 2010 Honda CR-V lug nut torque
- 2009 Honda CR-V lug nut torque
- 2008 Honda CR-V lug nut torque
- 2007 Honda CR-V lug nut torque
- 2005 Honda CR-V lug nut torque
- 2004 Honda CR-V lug nut torque
- 2003 Honda CR-V lug nut torque
- 2002 Honda CR-V lug nut torque
- 2001 Honda CR-V lug nut torque
- 2000 Honda CR-V lug nut torque
- 1999 Honda CR-V lug nut torque
- 1998 Honda CR-V lug nut torque
→ 2006 Honda CR-V brake job torque specs (caliper, bracket & slide pins)
8 recorded 2006 Honda CR-V fasteners
Every bolt we have on record for the 2006 Honda CR-V. A value marked verified names the document it came from. A verified torque doesn’t confirm the socket size, thread or part number, and a value that isn’t marked verified hasn’t been checked yet, so confirm it in your service manual. Where sources disagree, we leave the value out.
Wheels — 2006 Honda CR-V
Wheel fastener records and field evidence for the 2006 Honda CR-V. Wheel Lug Nut (Wheel Hub). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.
Brakes — 2006 Honda CR-V
Brake fastener records and field evidence for the 2006 Honda CR-V. Rear Brake Caliper Guide Pin Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Brake Caliper Guide Pin Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Brake Caliper Bracket Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Brake Caliper Bracket Bolt. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.
Engine — 2006 Honda CR-V
Engine fastener records and field evidence for the 2006 Honda CR-V. Oil Drain Plug (Oil pan). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Cylinder Head Bolt (Engine). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Connecting Rod Bolt (Engine). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.
New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.
Loading the interactive 2006 Honda CR-V fastener lookup with per-bolt filtering, part links, and torque tools…