2017–2018 Honda Pilot Bolt Sizes & Torque Specs

Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.

This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2018 Honda Pilot. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

These specifications also apply to the 2017 model years — identical specs on file for each year.

Honda and Acura platforms often reuse lug-thread conventions across related models, but the socket and torque must come from this vehicle's own record. Do not substitute a common import socket size for a measured lug nut.

Common fastener categories on the 2018 Honda Pilot

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
Transmission pan, valve cover, and intake manifold bolts where the database has exact records
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque only when a vehicle-specific spark-plug row is available
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2018 model-year work: This era introduced widespread torque-to-yield (TTY) bolts on head, main, and crank pulley fasteners. TTY bolts stretch permanently when torqued and must not be reused — the spec calls for a fresh bolt every time. Always verify TTY status against the FSM before reassembly.

Tools you will need

Metric socket set (8mm-22mm), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them

Frequently asked questions

What is the lug nut torque on a 2018 Honda Pilot?

Specification not verified for this lug nut summary. Do not substitute another model year's value.

What socket size do I need for the 2018 Honda Pilot lug nuts?

Confirm the socket against the actual lug nut; no size is assumed here.

Are the 2018 Honda Pilot fasteners metric or SAE?

Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.

Other Honda Pilot years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2018 Honda Pilot oil drain plug torque & size

All 3 2018 Honda Pilot fastener specs

Per-field evidence and legacy records for the 2018 Honda Pilot. A verified torque does not verify socket size, thread or part number. Unverified records are not installation instructions; conflicting specifications are withheld. 1 of the 3 records carry legacy review labels (last reviewed June 2026); those labels do not verify individual fields.

Wheels — 2018 Honda Pilot

Wheel and lug nut spec for the 2018 Honda Pilot. Lug Nut (All wheels). Torque: 94 ft-lbs (127 Nm) (legacy record, unverified). Socket size: not verified. Thread: M12x1.5 (legacy record, unverified). Part number: 90304-SA5-013 (legacy record, unverified).

Engine — 2018 Honda Pilot

Engine bolt-by-bolt torque for the 2018 Honda Pilot, including the long block, valve covers, and intake. Oil Drain Plug (Oil pan). Torque: 29 ft-lbs (39 Nm) (legacy record, unverified). Socket size: not verified. Thread: M14x1.5 (legacy record, unverified). Part number: 90009-R70-A00 (legacy record, unverified). Spark Plug. Torque: 13 ft-lbs (18 Nm) (legacy record, unverified). Socket size: 5/8in (legacy record, unverified). Thread: M14x1.25 (legacy record, unverified). Part number: 12290-PND-A01 (NGK IZFR6K11) (legacy record, unverified).

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2018 Honda Pilot numbers above.

Loading the interactive 2018 Honda Pilot fastener lookup with per-bolt filtering, part links, and torque tools…