2015–2016 Hyundai Santa Fe Bolt Sizes & Torque Specs

Does this apply to my Santa Fe?

Partly — the same 65-79 ft-lbs (88-107 Nm) for every 2016 Hyundai Santa Fe version we checked: 2 of 10 trim/engine versions, against the 2016 Hyundai Santa Fe Owner's Manual, p. PDF p. 635.

Versions checked (2)

3.3L V6: Limited, SE

Not checked against the manual yet: 2.0T I4: Limited, SE, Sport; 2.4L I4: Limited, SE, Sport; 2.0T I4 (trim not listed); 2.4L I4 (trim not listed).

This figure assumes: OEM wheels and lug nuts as specified in the owner's manual.

Aftermarket wheels or lug nuts: use the wheel or lug-nut maker's figure.

Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.

This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2016 Hyundai Santa Fe. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

These specifications also apply to the 2015 model years — identical specs on file for each year.

Field evidence: Lug nut torque is not verified; no specification is assumed. Lug nut socket size is not verified; no specification is assumed. Lug nut thread size is not verified; no specification is assumed. Lug nut part number is not verified; no specification is assumed.

Lug Nut — torque: 65-79 ft-lbs (88-107 Nm) — 2016 Hyundai Santa Fe Owner's Manual, p. PDF p. 635. OEM wheels and lug nuts as specified in the owner's manual. Applies to: 3.3L V6: Limited, SE (2 configurations).

Hyundai, Kia and Genesis models share many platform families, but the exact lug socket and torque can differ from one record to another. Use the value listed on this page and measure the lug nut when the socket field is blank.

Common fastener categories on the 2016 Hyundai Santa Fe

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
Transmission pan, valve cover, and intake manifold bolts where the database has exact records
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque only when a vehicle-specific spark-plug row is available
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2016 model-year work: This era introduced widespread torque-to-yield (TTY) bolts on head, main, and crank pulley fasteners. TTY bolts stretch permanently when torqued and must not be reused — the spec calls for a fresh bolt every time. Always verify TTY status against the FSM before reassembly.

Tools you will need

Metric and SAE socket set (8mm-22mm plus 1/4"-7/8"), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them

Frequently asked questions

What is the lug nut torque on a 2016 Hyundai Santa Fe?

Specification not verified for this lug nut summary. Do not substitute another model year's value. Field evidence: Lug nut torque is not verified; no specification is assumed. Lug nut socket size is not verified; no specification is assumed. Lug nut thread size is not verified; no specification is assumed. Lug nut part number is not verified; no specification is assumed.

Does the 2016 Hyundai Santa Fe lug nut torque depend on trim or engine?

Not for the versions we checked. We found the same 65-79 ft-lbs (88-107 Nm) for every 2016 Hyundai Santa Fe version we checked: 2 of 10 trim/engine versions, against the 2016 Hyundai Santa Fe Owner's Manual, p. PDF p. 635. Not checked against the manual yet: 2.0T I4: Limited, SE, Sport; 2.4L I4: Limited, SE, Sport; 2.0T I4 (trim not listed); 2.4L I4 (trim not listed). This figure assumes: OEM wheels and lug nuts as specified in the owner's manual. Aftermarket wheels or lug nuts: use the wheel or lug-nut maker's figure.

What socket size do I need for the 2016 Hyundai Santa Fe lug nuts?

Confirm the socket against the actual lug nut; no size is assumed here.

Are the 2016 Hyundai Santa Fe fasteners metric or SAE?

Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.

Other Hyundai Santa Fe years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2016 Hyundai Santa Fe suspension & steering torque specs (control arm, ball joint, tie rod)

10 recorded 2016 Hyundai Santa Fe fasteners

Every bolt we have on record for the 2016 Hyundai Santa Fe. A value marked verified names the document it came from. A verified torque doesn’t confirm the socket size, thread or part number, and a value that isn’t marked verified hasn’t been checked yet, so confirm it in your service manual. Where sources disagree, we leave the value out.

Wheels — 2016 Hyundai Santa Fe

Wheel fastener records and field evidence for the 2016 Hyundai Santa Fe. Lug Nut (All four wheels). Torque: 65-79 ft-lbs (88-107 Nm). Source: 2016 Hyundai Santa Fe Owner's Manual, p. PDF p. 635 (https://owners.hyundaiusa.com/content/dam/hyundai/us/myhyundai/manuals/glovebox-manual/2016/santa-fe/2016_Hyundai_SantaFe_OM.pdf). OEM wheels and lug nuts as specified in the owner's manual engine: 3.3L V6; trim: SE; axle: all Socket size: not verified. Thread: not verified. Part number: not verified.

Brakes — 2016 Hyundai Santa Fe

Brake fastener records and field evidence for the 2016 Hyundai Santa Fe. Front Brake Caliper Slide Pin (Front caliper slide pin). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Brake Caliper Bracket Bolt (Front brake caliper bracket). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Engine — 2016 Hyundai Santa Fe

Engine fastener records and field evidence for the 2016 Hyundai Santa Fe. Spark Plug (Cylinder head). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Oil Drain Plug (Engine oil pan). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Suspension — 2016 Hyundai Santa Fe

Suspension fastener records and field evidence for the 2016 Hyundai Santa Fe. Sway Bar End Link Nut (Front sway bar end link). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Strut Top Nut (Strut tower top mount). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Shock Lower Bolt (Rear shock absorber lower mount). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Tie Rod End Nut (Outer tie rod end to steering knuckle). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Hub/Bearing Nut (Front wheel hub/axle). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.

Loading the interactive 2016 Hyundai Santa Fe fastener lookup with per-bolt filtering, part links, and torque tools…