2023 Hyundai Tucson Lug Nut Torque & Bolt Specs

The 2023 Hyundai Tucson lug nut torque is 80 ft-lbs (108 Nm), tightened with a 17mm socket on M12x1.5 studs. Torque in a star pattern in two passes (snug, then final), and re-check after the first 50–100 miles of driving. Use a calibrated torque wrench — not an impact gun — for the final pass.

Lug nut torque: 80 ft-lbs (108 Nm) · Socket size: 17mm · Thread: M12x1.5.

This page is the OEM-referenced fastener summary for the 2023 Hyundai Tucson. Use it before any maintenance or repair job where torque values matter — brake work, wheel changes, suspension service, engine teardowns, or oil changes. Specs are pulled from manufacturer service literature, cross-checked against community data, and updated as new chassis variants become available.

Hyundai/Kia lug-nut torque is 79-88 ft-lbs on nearly all passenger models, M12x1.5 thread, 21mm socket. The Tucson, Sportage, and Santa Fe all use the same fastener spec. Hyundai's oil drain plug threads are unusually fine-pitch and strip easily — always use a torque wrench, not feel.

Common fastener categories on the 2023 Hyundai Tucson

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket bolts (typically 80-130 ft-lbs) and slide/guide pins (18-35 ft-lbs)
Engine oil drain plug torque — rarely above 30 ft-lbs; always use a new crush washer
Transmission pan, valve cover, and intake manifold bolts (low torque, often 89-106 in-lbs)
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque (typically 10-15 ft-lbs on aluminum heads — do not exceed)
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2023 late-model work: Modern vehicles increasingly use aluminum body and suspension components. Aluminum fastener torque is typically 60-70% of equivalent steel torque, and aluminum threads strip easily. Use a calibrated torque wrench and apply anti-seize on any steel fastener threading into aluminum.

Tools you will need

Metric socket set (8mm-22mm), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Anti-seize on stainless or dissimilar-metal threads; thread-locker (Loctite blue) on critical reassembly

Frequently asked questions

What is the lug nut torque on a 2023 Hyundai Tucson?

The OEM-specified lug-nut torque for the 2023 Hyundai Tucson is 80 ft-lbs (108 Nm), using a 17mm socket on M12x1.5 thread studs. Use a calibrated torque wrench in a star pattern, in two passes (50% and 100%), and re-check after 50-100 miles of driving.

What socket size do I need for the 2023 Hyundai Tucson lug nuts?

The 2023 Hyundai Tucson uses a 17mm socket. A 6-point impact-rated socket is recommended over a 12-point chrome socket — 12-points round off lug nuts under impact-driver use.

Are the 2023 Hyundai Tucson fasteners metric or SAE?

Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.

Other Hyundai Tucson years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2023 Hyundai Tucson lug nut torque: step-by-step & re-torque guide

→ 2023 Hyundai Tucson suspension & steering torque specs (control arm, ball joint, tie rod)

→ 2023 Hyundai Tucson axle nut torque spec (CV axle & hub nut)

→ 2023 Hyundai Tucson brake job torque specs (caliper, bracket & slide pins)

All 21 2023 Hyundai Tucson fastener specs

Per-bolt torque, wrench size, and thread spec for the 2023 Hyundai Tucson, sourced from OEM service literature and verified against community shop data. Values pair imperial (ft-lb) and metric (Nm) where the manufacturer publishes both. 6 of the 21 fastener specs on this page are independently verified against OEM service manuals and manufacturer torque data (last reviewed June 2026).

Brakes — 2023 Hyundai Tucson

Brake fasteners on the 2023 Hyundai Tucson — caliper bracket, slide pins, and banjo bolt torque follow. For the front caliper slide pin, plan for a 12mm tool on a M10x1.25 stud; final torque is 20 ft-lbs (27 Nm) (front brake caliper slide pin). Confirmed against manufacturer service literature. Front brake caliper bracket bolt tightens to 65 ft-lbs (88 Nm), takes a 17mm driver, runs on M12x1.25 threads, located at the front brake caliper bracket. This figure is independently verified against OEM service data.

Engine — 2023 Hyundai Tucson

Engine bolt-by-bolt torque for the 2023 Hyundai Tucson, including the long block, valve covers, and intake. Oil drain plug tightens to 25 ft-lbs (34 Nm), takes a 17mm driver, runs on M14x1.5 threads, located at the engine oil pan. This figure is independently verified against OEM service data. The spark plug uses a 5/8" drive on a M14x1.25 thread, torqued to 18 ft-lbs (25 Nm) at the cylinder head. OEM-verified spec. At the engine block, the oil filter torques to 15 Nm (76mm drive, 3/4-16 UNF thread). Confirmed against manufacturer service literature.

Suspension — 2023 Hyundai Tucson

Suspension and chassis fastener torque for the 2023 Hyundai Tucson — strut, control arm, and sway bar values. The tie rod end nut uses a 19mm drive on a M14x1.5 thread, torqued to 25-34 ft-lbs at the outer tie rod end to steering knuckle. At the rear shock absorber lower mount, the rear shock lower bolt torques to 65-80 ft-lbs (19mm drive, M14x1.5 thread). For the front wheel hub/axle, plan for a 32mm tool on a M24x1.5 stud; final torque is 148-192 ft-lbs (front hub/bearing nut). Front strut lower bolt tightens to 190 Nm, takes a 18mm driver, runs on M14x1.5 threads, located at the knuckle. The front strut top nut uses a 17mm drive on a M12x1.25 thread, torqued to 43-58 ft-lbs at the strut tower top mount. At the front/rear sway bar end link, the sway bar end link nut torques to 25-34 ft-lbs (14mm drive, M10x1.25 thread). For the knuckle, plan for a 19mm tool on a M14x1.5 stud; final torque is 50 Nm (front tie rod end nut). Front lower control arm tightens to 137 Nm, takes a 19mm driver, runs on M14x1.5 threads, located at the subframe. The front strut upper nut uses a 17mm drive on a M12x1.5 thread, torqued to 50 Nm at the strut tower.

Wheel — 2023 Hyundai Tucson

Wheel fasteners on the 2023 Hyundai Tucson. At the rear, the rear axle nut torques to 240 Nm (32mm drive, M24x1.5 thread). For the front, plan for a 32mm tool on a M24x1.5 stud; final torque is 240 Nm (front axle nut). Lug nut tightens to 80 ft-lbs (108 Nm), takes a 21mm driver, runs on M12x1.5 threads, located at the front/rear.

Brake — 2023 Hyundai Tucson

Brake fasteners on the 2023 Hyundai Tucson. For the rear hub, plan for a 17mm tool on a M14x1.5 stud; final torque is 69 Nm (rear brake caliper bracket). Rear brake caliper bolt tightens to 27 Nm, takes a 14mm driver, runs on M10x1.25 threads, located at the rear caliper. The front brake caliper bolt uses a 17mm drive on a M12x1.5 thread, torqued to 27 Nm at the front caliper. At the front hub, the front brake caliper bracket torques to 65 ft-lbs (88 Nm) (17mm drive, M14x1.5 thread). This figure is independently verified against OEM service data.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2023 Hyundai Tucson numbers above.

Loading the interactive 2023 Hyundai Tucson fastener lookup with per-bolt filtering, part links, and torque tools…