2005 Infiniti G35 Bolt Sizes & Torque Specs

Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.

This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2005 Infiniti G35. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

Field evidence: Lug nut torque is not verified; no specification is assumed. Lug nut socket size is not verified; no specification is assumed. Lug nut thread size is not verified; no specification is assumed. Lug nut part number is not verified; no specification is assumed.

Nissan and Infiniti often use fine-pitch wheel studs on passenger models, but the exact thread, socket and torque are still vehicle-specific. Confirm the recorded row and never cross-thread lug nuts borrowed from a neighboring make.

Common fastener categories on the 2005 Infiniti G35

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
Transmission pan, valve cover, and intake manifold bolts where the database has exact records
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque only when a vehicle-specific spark-plug row is available
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2005 model-year work: Always use a calibrated torque wrench for safety-critical fasteners, and replace lock washers and crush washers on every reassembly.

Tools you will need

Metric and SAE socket set (8mm-22mm plus 1/4"-7/8"), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them

Frequently asked questions

What is the lug nut torque on a 2005 Infiniti G35?

Specification not verified for this lug nut summary. Do not substitute another model year's value. Field evidence: Lug nut torque is not verified; no specification is assumed. Lug nut socket size is not verified; no specification is assumed. Lug nut thread size is not verified; no specification is assumed. Lug nut part number is not verified; no specification is assumed.

What socket size do I need for the 2005 Infiniti G35 lug nuts?

Confirm the socket against the actual lug nut; no size is assumed here.

Are the 2005 Infiniti G35 fasteners metric or SAE?

Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.

Other Infiniti G35 years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2005 Infiniti G35 suspension & steering torque specs (control arm, ball joint, tie rod)

12 recorded 2005 Infiniti G35 fasteners

Every bolt we have on record for the 2005 Infiniti G35. A value marked verified names the document it came from. A verified torque doesn’t confirm the socket size, thread or part number, and a value that isn’t marked verified hasn’t been checked yet, so confirm it in your service manual. Where sources disagree, we leave the value out.

Brakes — 2005 Infiniti G35

Brake fastener records and field evidence for the 2005 Infiniti G35. Front Caliper Bracket Bolt (Front). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Caliper Slide Pin (Rear). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Caliper Bracket Bolt (Rear). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Caliper Slide Pin (Front). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Engine — 2005 Infiniti G35

Engine fastener records and field evidence for the 2005 Infiniti G35. Oil Drain Plug. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Oil Filter. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Spark Plug. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Suspension — 2005 Infiniti G35

Suspension fastener records and field evidence for the 2005 Infiniti G35. Rear Lower Control Arm Bolt (Rear). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Strut Top Nut (Front). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Lower Control Arm Bolt (Front). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Wheels & Tires — 2005 Infiniti G35

Wheels & Tires fasteners on the 2005 Infiniti G35. Lug Nut. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Transmission — 2005 Infiniti G35

Transmission fasteners on the 2005 Infiniti G35. Transmission Drain Plug. Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.

Loading the interactive 2005 Infiniti G35 fastener lookup with per-bolt filtering, part links, and torque tools…