2024 John Deere 1025R Lug Nut Torque & Bolt Specs
The source-backed 2024 John Deere 1025R lug nut torque is 70 ft-lbs (95 Nm). Match the application and hardware conditions in the cited manual; do not assume the same value applies to aftermarket hardware.
Does this apply to my 1025R?
Checked for Yanmar 3TNM72: MFWD — 70 ft-lbs (95 Nm) — against the 1023E and 1025R Compact Utility Tractors Operator's Manual, OMTR153280 ISSUE K5 (Serial No. RS000001-), p. 131.
This figure assumes: clean, dry threads unless the manual states otherwise; factory hardware.
Lug nut torque: 70 ft-lbs (95 Nm).
Where these numbers come from
2 values for the 2024 John Deere 1025R are checked against a maker’s document. Each row names the document, the page or section and the manual’s own wording, so you can check it yourself.
| Spec | Value | Document and page | Manual wording | Applies to |
|---|---|---|---|---|
| Front Wheel Lug Bolt — torque | 70 ft-lbs (95 Nm) | 1023E and 1025R Compact Utility Tractors Operator's Manual, OMTR153280 ISSUE K5 (Serial No. RS000001-), p. 131 · techpubs.deere.com | “3. Tighten wheel bolts alternately to specification. Specification: Wheel Bolt - Torque . . . 95 N-m (70 lb-ft)” | clean, dry threads unless the manual states otherwise; factory hardware. Applies to: Yanmar 3TNM72: MFWD (1 configuration). |
| Rear Wheel Lug Bolt — torque | 70 ft-lbs (95 Nm) | 1023E and 1025R Compact Utility Tractors Operator's Manual, OMTR153280 ISSUE K5 (Serial No. RS000001-), p. 131 · techpubs.deere.com | “3. Tighten wheel bolts alternately to specification. Specification: Wheel Bolt - Torque . . . 95 N-m (70 lb-ft)” | clean, dry threads unless the manual states otherwise; factory hardware. Applies to: Yanmar 3TNM72: MFWD (1 configuration). |
Tools for this job
Matched to the specs on this page.
As an Amazon Associate I earn from qualifying purchases. Tool picks are general options, not a fit guarantee for your vehicle or fastener.
- 1/2" Drive Click Torque Wrench (10–150 ft-lb)Lug nuts: Its rated range includes the torque shown on this page.EPAuto 1/2" Drive Click Torque Wrench, 10–150 ft-lb — view on Amazon
- Lug Nut Socket Set (17/19/21/22 mm)Lug nuts: Wheel-protective sleeves. Measure your lug nut first; this set covers 17, 19, 21 and 22 mm.MIXPOWER 1/2"-Drive Wheel Protector Thin-Wall Deep Lug Socket Set (4-pc) — view on Amazon
Every value on this page for the 2024 John Deere 1025R names the document it was checked against. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.
Frequently asked questions
What is the lug nut torque on a 2024 John Deere 1025R?
The source-backed lug-nut torque for the 2024 John Deere 1025R is 70 ft-lbs (95 Nm). Match the exact application, hardware and tightening conditions in the cited manual. Field evidence: Lug nut torque confirmed against 1023E and 1025R Compact Utility Tractors Operator's Manual, OMTR153280 ISSUE K5 (Serial No. RS000001-), p. 131 (https://techpubs.deere.com/api/preview/get/OMTR153280). clean, dry threads unless the manual states otherwise; factory hardware; engine: Yanmar 3TNM72; trim: MFWD.
Are the 2024 John Deere 1025R fasteners metric or SAE?
Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.
Not yet verified for the 2024 John Deere 1025R: lug nut socket size. Check your owner’s or service manual, or ask a dealer. Send a correction
Other John Deere 1025R years
Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.
- 2023 John Deere 1025R lug nut torque
- 2022 John Deere 1025R lug nut torque
- 2021 John Deere 1025R lug nut torque
- 2020 John Deere 1025R lug nut torque
- 2019 John Deere 1025R lug nut torque
- 2018 John Deere 1025R lug nut torque
- 2017 John Deere 1025R lug nut torque
- 2016 John Deere 1025R lug nut torque
- 2015 John Deere 1025R lug nut torque
- 2014 John Deere 1025R lug nut torque
- 2013 John Deere 1025R lug nut torque
- 2012 John Deere 1025R lug nut torque
Fasteners on record for the 2024 John Deere 1025R
2 of the 7 fasteners on record for the 2024 John Deere 1025R have at least one value checked against a maker’s document; each sentence below names it. A checked torque does not confirm the socket size, thread or part number. Where sources disagree, the value is withheld.
Wheels — 2024 John Deere 1025R
Wheel fasteners checked against a maker’s document for the 2024 John Deere 1025R. Rear Wheel Lug Bolt (Wheels). Torque: 70 ft-lbs (95 Nm). Source: 1023E and 1025R Compact Utility Tractors Operator's Manual, OMTR153280 ISSUE K5 (Serial No. RS000001-), p. 131. clean, dry threads unless the manual states otherwise; factory hardware engine: Yanmar 3TNM72; trim: MFWD Front Wheel Lug Bolt (Wheels). Torque: 70 ft-lbs (95 Nm). Source: 1023E and 1025R Compact Utility Tractors Operator's Manual, OMTR153280 ISSUE K5 (Serial No. RS000001-), p. 131. clean, dry threads unless the manual states otherwise; factory hardware engine: Yanmar 3TNM72; trim: MFWD
Also on record but not yet checked against a maker’s document (5): Backhoe Subframe Bolt, Engine Oil Drain Plug, Glow Plug, Loader Mounting Bracket Bolt, PTO Shield Bolt. Their stored figures are not shown until a document confirms them. Have the factory figure? Send a correction.
New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.
Loading the interactive 2024 John Deere 1025R fastener lookup with per-bolt filtering, part links, and torque tools…