2021 Nissan Maxima Lug Nut Torque & Bolt Specs

The source-backed 2021 Nissan Maxima lug nut torque is 83 ft-lbs (113 Nm). Match the application and hardware conditions in the cited manual; do not assume the same value applies to aftermarket hardware.

Lug nut torque: 83 ft-lbs (113 Nm).

This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2021 Nissan Maxima. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

Field evidence: Lug nut torque confirmed against 2021 Nissan Maxima Owner's Manual, Wheel nut tightening torque (quoted) (https://www.nissanusa.com/content/dam/Nissan/us/manuals-and-guides/maxima/2021/2021-nissan-maxima-owner-manual.pdf). OEM wheels and lug nuts as specified in the owner's manual engine: 3.5L V6; trim: S Lug nut socket size is not verified; no specification is assumed. Lug nut thread size is not verified; no specification is assumed. Lug nut part number is not verified; no specification is assumed.

Lug Nut — torque: 83 ft-lbs (113 Nm) — 2021 Nissan Maxima Owner's Manual, Wheel nut tightening torque (quoted). OEM wheels and lug nuts as specified in the owner's manual. Applies to: 3.5L V6: Platinum, S, S/SV/SL/Platinum, SL, SR, SV (6 configurations).

Nissan and Infiniti often use fine-pitch wheel studs on passenger models, but the exact thread, socket and torque are still vehicle-specific. Confirm the recorded row and never cross-thread lug nuts borrowed from a neighboring make.

Common fastener categories on the 2021 Nissan Maxima

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
Transmission pan, valve cover, and intake manifold bolts where the database has exact records
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque only when a vehicle-specific spark-plug row is available
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2021 late-model work: Modern vehicles increasingly mix aluminum, high-strength steel and coated fasteners. Use the exact fastener record and service-manual procedure for the joint you are touching; do not adjust torque or add compounds unless the procedure calls for it.

Tools you will need

Metric and SAE socket set (8mm-22mm plus 1/4"-7/8"), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them

Frequently asked questions

What is the lug nut torque on a 2021 Nissan Maxima?

The source-backed lug-nut torque for the 2021 Nissan Maxima is 83 ft-lbs (113 Nm). Match the exact application, hardware and tightening conditions in the cited manual. Field evidence: Lug nut torque confirmed against 2021 Nissan Maxima Owner's Manual, Wheel nut tightening torque (quoted) (https://www.nissanusa.com/content/dam/Nissan/us/manuals-and-guides/maxima/2021/2021-nissan-maxima-owner-manual.pdf). OEM wheels and lug nuts as specified in the owner's manual engine: 3.5L V6; trim: S Lug nut socket size is not verified; no specification is assumed. Lug nut thread size is not verified; no specification is assumed. Lug nut part number is not verified; no specification is assumed.

What socket size do I need for the 2021 Nissan Maxima lug nuts?

Confirm the socket against the actual lug nut; no size is assumed here.

Are the 2021 Nissan Maxima fasteners metric or SAE?

Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.

Other Nissan Maxima years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2021 Nissan Maxima oil drain plug torque & size

15 recorded 2021 Nissan Maxima fasteners

Per-field evidence and legacy records for the 2021 Nissan Maxima. A verified torque does not verify socket size, thread or part number. Unverified records are not installation instructions; conflicting specifications are withheld. 2 of the 15 records carry legacy review labels (last reviewed September 2026); those labels do not verify individual fields.

Brakes — 2021 Nissan Maxima

Brake fastener records and field evidence for the 2021 Nissan Maxima. Front Caliper Slide Pin (Front caliper). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Caliper Slide Pin (Rear caliper). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Rear Caliper Bracket Bolt (Rear knuckle). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Caliper Bracket Bolts (Front Hub). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Caliper Guide Pins (Front Caliper). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Caliper Bracket Bolt (Front knuckle). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Engine — 2021 Nissan Maxima

Engine fastener records and field evidence for the 2021 Nissan Maxima. Spark Plug (Cylinder head). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Oil Drain Plug (Oil Pan). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Valve Cover Bolts (Cylinder Head). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Drivetrain — 2021 Nissan Maxima

Drivetrain fastener records and field evidence for the 2021 Nissan Maxima. Front Axle Hub Nut (Front hub). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Suspension — 2021 Nissan Maxima

Suspension fastener records and field evidence for the 2021 Nissan Maxima. Strut Tower Nuts (Strut Tower). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Lower Control Arm Bolt (Front) (Subframe). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Wheel — 2021 Nissan Maxima

Wheel fasteners on the 2021 Nissan Maxima. Lug Nut (Wheels). Torque: 83 ft-lbs (113 Nm). Source: 2021 Nissan Maxima Owner's Manual, Wheel nut tightening torque (quoted) (https://www.nissanusa.com/content/dam/Nissan/us/manuals-and-guides/maxima/2021/2021-nissan-maxima-owner-manual.pdf). OEM wheels and lug nuts as specified in the owner's manual engine: 3.5L V6; trim: S Socket size: not verified. Thread: not verified. Part number: not verified.

Transmission — 2021 Nissan Maxima

Transmission fasteners on the 2021 Nissan Maxima. Transmission Pan Bolts (Transmission Case). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Ignition — 2021 Nissan Maxima

Ignition fasteners on the 2021 Nissan Maxima. Spark Plugs (Cylinder Head). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.

Loading the interactive 2021 Nissan Maxima fastener lookup with per-bolt filtering, part links, and torque tools…