2023 Nissan Murano Lug Nut Torque & Bolt Specs

The 2023 Nissan Murano lug nut torque is 80 ft-lbs (108 Nm), tightened with a 21mm socket on M12x1.25 studs. Torque in a star pattern in two passes (snug, then final), and re-check after the first 50–100 miles of driving. Use a calibrated torque wrench — not an impact gun — for the final pass.

Lug nut torque: 80 ft-lbs (108 Nm) · Socket size: 21mm · Thread: M12x1.25.

This page is the OEM-referenced fastener summary for the 2023 Nissan Murano. Use it before any maintenance or repair job where torque values matter — brake work, wheel changes, suspension service, engine teardowns, or oil changes. Specs are pulled from manufacturer service literature, cross-checked against community data, and updated as new chassis variants become available.

Nissan lug-nut torque is 83 ft-lbs (113 Nm) for nearly every passenger model since 2000 with an M12x1.25 thread (note: tighter pitch than Toyota/Honda's M12x1.5 — the lugs do not cross-thread cleanly with neighboring makes). Socket size is 21mm. Titans and Armadas use a larger M14x1.5 thread at 133 ft-lbs.

Common fastener categories on the 2023 Nissan Murano

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket bolts (typically 80-130 ft-lbs) and slide/guide pins (18-35 ft-lbs)
Engine oil drain plug torque — rarely above 30 ft-lbs; always use a new crush washer
Transmission pan, valve cover, and intake manifold bolts (low torque, often 89-106 in-lbs)
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque (typically 10-15 ft-lbs on aluminum heads — do not exceed)
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2023 late-model work: Modern vehicles increasingly use aluminum body and suspension components. Aluminum fastener torque is typically 60-70% of equivalent steel torque, and aluminum threads strip easily. Use a calibrated torque wrench and apply anti-seize on any steel fastener threading into aluminum.

Tools you will need

Metric socket set (8mm-22mm), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Anti-seize on stainless or dissimilar-metal threads; thread-locker (Loctite blue) on critical reassembly

Frequently asked questions

What is the lug nut torque on a 2023 Nissan Murano?

The OEM-specified lug-nut torque for the 2023 Nissan Murano is 80 ft-lbs (108 Nm), using a 21mm socket on M12x1.25 thread studs. Use a calibrated torque wrench in a star pattern, in two passes (50% and 100%), and re-check after 50-100 miles of driving.

What socket size do I need for the 2023 Nissan Murano lug nuts?

The 2023 Nissan Murano uses a 21mm socket. A 6-point impact-rated socket is recommended over a 12-point chrome socket — 12-points round off lug nuts under impact-driver use.

Are the 2023 Nissan Murano fasteners metric or SAE?

Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.

Other Nissan Murano years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2023 Nissan Murano oil drain plug torque & size

All 8 2023 Nissan Murano fastener specs

Per-bolt torque, wrench size, and thread spec for the 2023 Nissan Murano, sourced from OEM service literature and verified against community shop data. Values pair imperial (ft-lb) and metric (Nm) where the manufacturer publishes both. 5 of the 8 fastener specs on this page are independently verified against OEM service manuals and manufacturer torque data.

Wheels — 2023 Nissan Murano

Wheel and lug nut spec for the 2023 Nissan Murano. For the all four wheels, plan for a 21mm tool on a M12x1.25 stud; final torque is 80 ft-lbs (108 Nm) (lug nut).

Brakes — 2023 Nissan Murano

Brake fasteners on the 2023 Nissan Murano — caliper bracket, slide pins, and banjo bolt torque follow. Rear brake caliper bracket bolt tightens to 122 ft-lb, takes a 22mm driver, runs on M14x1.5 threads, located at the rear — caliper bracket to knuckle/carrier, 2 bolts per side. This figure is independently verified against OEM service data. The front brake caliper bracket bolt uses a 22mm drive on a M14x1.5 thread, torqued to 107 ft-lb at the front — caliper bracket to steering knuckle, 2 bolts per side. OEM-verified spec. At the front — caliper to bracket, 2 bolts per side (upper and lower), the front brake caliper slide pin bolt torques to 34 ft-lb (17mm drive, M12x1.25 thread). Confirmed against manufacturer service literature.

Engine — 2023 Nissan Murano

Engine bolt-by-bolt torque for the 2023 Nissan Murano, including the long block, valve covers, and intake. The spark plug uses a 14mm spark plug socket drive on a M14x1.25 thread, torqued to 15 ft-lb at the 6 plugs — 3 front bank (easy access), 3 rear bank (requires upper intake plenum removal). OEM-verified spec. At the bottom of oil pan — vq35de engine, the oil drain plug torques to 25 ft-lb (14mm drive, M12x1.25 thread). Confirmed against manufacturer service literature.

Drivetrain — 2023 Nissan Murano

Drivetrain and driveline fasteners for the 2023 Nissan Murano — axle, transmission, and differential plugs. At the center of front hub, behind wheel — one per side, the front axle / cv shaft nut torques to 177 ft-lb (32mm drive, M28x1.5 thread).

Suspension — 2023 Nissan Murano

Suspension and chassis fastener torque for the 2023 Nissan Murano — strut, control arm, and sway bar values. For the hub/bearing to knuckle — 4 bolts per corner, all four wheels, plan for a 17mm tool on a M12x1.25 stud; final torque is 55 ft-lb (wheel hub / bearing assembly bolt).

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2023 Nissan Murano numbers above.

Loading the interactive 2023 Nissan Murano fastener lookup with per-bolt filtering, part links, and torque tools…