2012 Ram Ram 1500 Bolt Sizes & Torque Specs

Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.

This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2012 Ram Ram 1500. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

Field evidence: Lug nut torque is not verified; no specification is assumed. Lug nut socket size is not verified; no specification is assumed. Lug nut thread size is not verified; no specification is assumed. Lug nut part number is not verified; no specification is assumed.

Jeep, Ram, Dodge and Chrysler hardware changes by platform and wheel design, so a Wrangler, minivan and heavy-duty truck cannot share a generic torque answer. Match the exact year/model row and preserve hub-centric or seat-style requirements.

Fourth generation (DS, 2009–2018)

The 2012 Ram 1500 is the fourth-generation DS truck (2009–2018), the first full-size pickup in decades to adopt a coil-spring five-link rear suspension in place of leaf springs. Its signature engine is the 5.7-liter HEMI V8 (around 390 hp), with the 3.6-liter Pentastar V6 becoming standard from 2013.

DS trucks use a five-lug wheel, and Ram changed the stud thread partway through the run — 9/16-18 on 2009–2011 trucks and metric M14x1.5 from 2012 on — so confirm the year before buying lug nuts.

Common fastener categories on the 2012 Ram Ram 1500

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
Transmission pan, valve cover, and intake manifold bolts where the database has exact records
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque only when a vehicle-specific spark-plug row is available
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2012 model-year work: This era introduced widespread torque-to-yield (TTY) bolts on head, main, and crank pulley fasteners. TTY bolts stretch permanently when torqued and must not be reused — the spec calls for a fresh bolt every time. Always verify TTY status against the FSM before reassembly.

Tools you will need

Metric and SAE socket set (8mm-22mm plus 1/4"-7/8"), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them

Frequently asked questions

What is the lug nut torque on a 2012 Ram Ram 1500?

Specification not verified for this lug nut summary. Do not substitute another model year's value. Field evidence: Lug nut torque is not verified; no specification is assumed. Lug nut socket size is not verified; no specification is assumed. Lug nut thread size is not verified; no specification is assumed. Lug nut part number is not verified; no specification is assumed.

What socket size do I need for the 2012 Ram Ram 1500 lug nuts?

Confirm the socket against the actual lug nut; no size is assumed here.

Are the 2012 Ram Ram 1500 fasteners metric or SAE?

Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.

Other Ram Ram 1500 years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

2 recorded 2012 Ram Ram 1500 fasteners

Per-field evidence and legacy records for the 2012 Ram Ram 1500. A verified torque does not verify socket size, thread or part number. Unverified records are not installation instructions; conflicting specifications are withheld. 1 of the 2 records carry legacy review labels (last reviewed June 2026); those labels do not verify individual fields.

Wheels — 2012 Ram Ram 1500

Wheel fastener records and field evidence for the 2012 Ram Ram 1500. Lug Nut (All four wheels). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Engine — 2012 Ram Ram 1500

Engine fastener records and field evidence for the 2012 Ram Ram 1500. Oil Drain Plug (Oil pan). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.

Loading the interactive 2012 Ram Ram 1500 fastener lookup with per-bolt filtering, part links, and torque tools…