2017 Takeuchi Tb235 2 Bolt Sizes & Torque Specs

Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.

This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2017 Takeuchi Tb235 2. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

For the 2017 Takeuchi Tb235 2, fasteners follow application-specific metric or SAE standards typical of late-model Takeuchi engineering. Always confirm spec against the factory service manual before tightening safety-critical fasteners (suspension, brake, steering, head bolts).

Common fastener categories on the 2017 Takeuchi Tb235 2

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
Transmission pan, valve cover, and intake manifold bolts where the database has exact records
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque only when a vehicle-specific spark-plug row is available
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2017 model-year work: This era introduced widespread torque-to-yield (TTY) bolts on head, main, and crank pulley fasteners. TTY bolts stretch permanently when torqued and must not be reused — the spec calls for a fresh bolt every time. Always verify TTY status against the FSM before reassembly.

Tools you will need

Metric and SAE socket set (8mm-22mm plus 1/4"-7/8"), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them

Frequently asked questions

What is the lug nut torque on a 2017 Takeuchi Tb235 2?

Specification not verified for this lug nut summary. Do not substitute another model year's value.

What socket size do I need for the 2017 Takeuchi Tb235 2 lug nuts?

Confirm the socket against the actual lug nut; no size is assumed here.

Are the 2017 Takeuchi Tb235 2 fasteners metric or SAE?

Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.

Other Takeuchi Tb235 2 years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

6 recorded 2017 Takeuchi Tb235 2 fasteners

Every bolt we have on record for the 2017 Takeuchi Tb235 2. A value marked verified names the document it came from. A verified torque doesn’t confirm the socket size, thread or part number, and a value that isn’t marked verified hasn’t been checked yet, so confirm it in your service manual. Where sources disagree, we leave the value out.

Engine — 2017 Takeuchi Tb235 2

Engine fastener records and field evidence for the 2017 Takeuchi Tb235 2. Engine Oil Drain Plug (Yanmar 3TNV88F) (Engine oil sump drain). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Drivetrain — 2017 Takeuchi Tb235 2

Drivetrain fastener records and field evidence for the 2017 Takeuchi Tb235 2. Final Drive Drain Plug (Final drive gear box drain (2 — one per side)). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Undercarriage — 2017 Takeuchi Tb235 2

Undercarriage fasteners on the 2017 Takeuchi Tb235 2. Track Shoe Bolt (Track shoes — 3 bolts per shoe, both sides). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Swing Bearing Bolt (Swing bearing ring (mounting bolts)). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Attachment — 2017 Takeuchi Tb235 2

Attachment fasteners on the 2017 Takeuchi Tb235 2. Bucket Pin Retaining Bolt (Bucket pin lock bolt). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Safety — 2017 Takeuchi Tb235 2

Safety fasteners on the 2017 Takeuchi Tb235 2. ROPS/Canopy Mounting Bolt (ROPS canopy to upper frame (4 bolts)). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.

Loading the interactive 2017 Takeuchi Tb235 2 fastener lookup with per-bolt filtering, part links, and torque tools…