11 mm to SAE — Closest Inch / Fraction Equivalent

11 mm converts to approximately 7/16" (0.4375" or 11.11 mm exact). snug fit — 0.11 mm difference, safe swap.

Quick answer: what is 11 mm in SAE?

The closest SAE wrench / socket size to 11 mm is 7/16", which equals 11.11 mm. The difference is 0.11 mm — effectively interchangeable on any bolt.

Is 7/16" the same as 11 mm?

Not quite — 7/16" = 11.11 mm, so the SAE size is slightly larger than 11 mm by 0.11 mm. snug fit — 0.11 mm difference, safe swap.

When can I substitute 7/16" for 11 mm?

Use the SAE substitute when (1) the bolt head is clean and sharp — no rust, no prior rounding, (2) you have a 6-point socket not 12-point, and (3) torque is moderate. For breaking loose a seized bolt, anything safety-critical (suspension, brakes, head bolts), or impact-driver use, always use the correct metric size. Honda, Toyota, and most Japanese OEMs spec metric and have tight head clearances — do not substitute on those vehicles.

Does the same logic work for 7/16" to mm?

Yes. 7/16" to mm = 11.11 mm. A 11 mm socket on a 7/16" bolt will be too tight (undershoot by 0.11 mm) — will not fit.

Full mm to SAE wrench & socket conversion chart

Quick reference for every common size — 8 mm = 5/16", 9 mm = 11/32", 10 mm = 3/8", 11 mm = 7/16", 12 mm = 15/32", 13 mm = 1/2", 14 mm = 9/16", 15 mm = 19/32", 16 mm = 5/8", 17 mm = 11/16", 18 mm = 23/32", 19 mm = 3/4", 21 mm = 13/16", 22 mm = 7/8", 24 mm = 15/16", 27 mm = 1-1/16", 30 mm = 1-3/16", 32 mm = 1-1/4", 36 mm = 1-7/16", 41 mm = 1-5/8". These are closest-fit tool sizes, not exact math; see the notes above for the exact millimetre difference and whether each swap is safe on a real bolt.

Related lookups

Loading interactive lookup…