2012 Honda Accord Brake Job Torque Specs

Compare 3 named brake fastener records for 2012 Honda Accord. These records are not a universal caliper mounting or bracket torque answer. Verify the exact part, axle, variant and source against the service manual. Full bolt records for the rest of the vehicle are linked below.

Hydraulic (Banjo & Bleeder) records — 2012 Honda Accord

Recorded fastener names and fields for 2012 Honda Accord: Brake Bleeder Valve (torques to 7 ft-lbs, 8mm socket, M8x1.0 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

Other Brake Fasteners records — 2012 Honda Accord

Recorded fastener names and fields for 2012 Honda Accord: Brake Caliper Bolt (torques to 22 ft-lbs, 14mm socket, M12x1.25 thread); Brake Caliper Bracket (torques to 80 ft-lbs (108 Nm), 17mm socket, M12x1.25 thread). Grouping is navigation, not verification of a part's type, source or applicability. Confirm the exact fastener, axle, variant and procedure in the service manual; never substitute a slide-pin or bleeder specification for a mounting or bracket bolt.

How to do a Accord brake job right

Consult the service manual for the exact axle and variant before starting. Identify the mounting bolts, bracket bolts and slide/guide pins separately. Bolt reuse, lubrication, threadlocker and torque-to-yield requirements are application-specific, not universal rules for a display group. Support the caliper safely without loading the hose, and use the specified tightening sequence with a calibrated torque wrench rather than an impact tool.

Tools you need for a Accord brake job

Recorded socket sizes for 2012 Honda Accord: 14mm, 8mm, 17mm. Other tools may include a caliper slide-pin tool or hex/Torx bit set, a torque wrench that covers the specified torque values, plus thread-locker or brake lubricant only where the manual calls for it. A caliper piston compressor makes seating the new pads far easier. See the recommended tools and replacement hardware linked below.

Related lookups

Loading interactive lookup…