2022 Toyota 4Runner Lug Nut Torque Specs
The OEM lug nut torque for the 2022 Toyota 4Runner is 76 ft-lbs (103 Nm) aluminum wheels / 83 ft-lbs (112 Nm) steel wheels. Tighten in a star pattern in two passes — about half, then full — and re-check at the interval in your owner's manual. Full bolt and torque specs for the rest of the vehicle are linked below.
What is the lug nut torque for the 2022 Toyota 4Runner?
The OEM-specified lug nut torque for the 2022 Toyota 4Runner is 76 ft-lbs (103 Nm) aluminum wheels / 83 ft-lbs (112 Nm) steel wheels. Use a calibrated torque wrench for the final pass — an impact gun cannot hit a precise value and is the most common cause of warped rotors and stretched studs. The clamp load settles as the wheel seats against the hub, so re-check at the interval in your owner's manual or the wheel maker's instructions.
What socket size fits the 4Runner lug nuts?
Measure across the flats of the lug nut to confirm the socket size, then use a 6-point impact-rated socket rather than a 12-point chrome socket to avoid rounding the nut.
How to torque the 4Runner wheels correctly
Thread every lug nut on by hand first to avoid cross-threading, then torque to 76 ft-lbs (103 Nm) aluminum wheels / 83 ft-lbs (112 Nm) steel wheels in a star (criss-cross) pattern across two passes — roughly 50% then 100%. Never run one nut down fully before the others; it cocks the wheel and warps the rotor. Lower the vehicle so the tire is loaded before the final pass, and re-check at the interval in your owner's manual.
Related lookups
- 2022 Toyota 4Runner — Full Bolt & Torque Specs
- Wheel Lug Nut Torque Guide
- Standard Torque Specs by Grade
- Wrench & Socket Size Finder
Loading interactive lookup…