2010 Dodge Ram 3500 Bolt Sizes & Torque Specs

Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.

This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2010 Dodge Ram 3500. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

Jeep, Ram, Dodge and Chrysler hardware changes by platform and wheel design, so a Wrangler, minivan and heavy-duty truck cannot share a generic torque answer. Match the exact year/model row and preserve hub-centric or seat-style requirements.

Common fastener categories on the 2010 Dodge Ram 3500

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
Transmission pan, valve cover, and intake manifold bolts where the database has exact records
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque only when a vehicle-specific spark-plug row is available
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2010 model-year work: This era introduced widespread torque-to-yield (TTY) bolts on head, main, and crank pulley fasteners. TTY bolts stretch permanently when torqued and must not be reused — the spec calls for a fresh bolt every time. Always verify TTY status against the FSM before reassembly.

Tools you will need

Metric socket set (8mm-22mm), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them

Frequently asked questions

What is the lug nut torque on a 2010 Dodge Ram 3500?

Specification not verified for this lug nut summary. Do not substitute another model year's value.

What socket size do I need for the 2010 Dodge Ram 3500 lug nuts?

Confirm the socket against the actual lug nut; no size is assumed here.

Are the 2010 Dodge Ram 3500 fasteners metric or SAE?

Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.

Other Dodge Ram 3500 years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2010 Dodge Ram 3500 oil drain plug torque & size

All 14 2010 Dodge Ram 3500 fastener specs

Per-field evidence and legacy records for the 2010 Dodge Ram 3500. A verified torque does not verify socket size, thread or part number. Unverified records are not installation instructions; conflicting specifications are withheld.

Wheels — 2010 Dodge Ram 3500

Wheel and lug nut spec for the 2010 Dodge Ram 3500. Outer Rear Lug Nut (DRW) (Rear outer wheel). Torque: 100 ft-lbs (135 Nm) (legacy record, unverified). Socket size: 22mm (legacy record, unverified). Thread: M12x1.5 (legacy record, unverified). Part number: not verified. Lug Nut (All four corners). Torque: 100 ft-lbs (135 Nm) (legacy record, unverified). Socket size: 22mm (legacy record, unverified). Thread: M12x1.5 (legacy record, unverified). Part number: not verified. Inner Rear Lug Nut (DRW) (Rear inner wheel). Torque: 100 ft-lbs (135 Nm) (legacy record, unverified). Socket size: 22mm (legacy record, unverified). Thread: M12x1.5 (legacy record, unverified). Part number: not verified.

Brakes — 2010 Dodge Ram 3500

Brake fasteners on the 2010 Dodge Ram 3500 — caliper bracket, slide pins, and banjo bolt torque follow. Front Brake Caliper Bracket Bolt (Front axle, caliper bracket). Torque: 125 ft-lbs (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified. Front Caliper Slide Pin (Front caliper). Torque: 25-35 ft-lbs (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified.

Engine — 2010 Dodge Ram 3500

Engine bolt-by-bolt torque for the 2010 Dodge Ram 3500, including the long block, valve covers, and intake. Glow Plug (Cylinder head). Torque: 15 ft-lbs (legacy record, unverified). Socket size: 12mm (legacy record, unverified). Thread: M12x1.25 (legacy record, unverified). Part number: not verified. Spark Plug (Cylinder head). Torque: 13 ft-lbs (18 Nm) (legacy record, unverified). Socket size: 9/16" (legacy record, unverified). Thread: M14x1.25 (legacy record, unverified). Part number: SPLZFR5C11 (NGK LZFR5C-11) (legacy record, unverified). Oil Drain Plug (Oil pan). Torque: 37 ft-lbs (50 Nm) (legacy record, unverified). Socket size: 27mm (legacy record, unverified). Thread: M18x1.5 (legacy record, unverified). Part number: 68210509AA (legacy record, unverified).

Drivetrain — 2010 Dodge Ram 3500

Drivetrain and driveline fasteners for the 2010 Dodge Ram 3500 — axle, transmission, and differential plugs. Transfer Case Drain Plug (Transfer case). Torque: 20-25 ft-lbs (legacy record, unverified). Socket size: 24mm (legacy record, unverified). Thread: M20x1.5 (legacy record, unverified). Part number: not verified. Front Differential Fill Plug (Front differential). Torque: 25 ft-lbs (legacy record, unverified). Socket size: See notes (legacy record, unverified). Thread: 3/8" sq (legacy record, unverified). Part number: not verified.

Suspension — 2010 Dodge Ram 3500

Suspension and chassis fastener torque for the 2010 Dodge Ram 3500 — strut, control arm, and sway bar values. Rear Leaf Spring U-Bolt Nut (Rear leaf spring). Torque: 135-175 ft-lbs (legacy record, unverified). Socket size: 22mm (legacy record, unverified). Thread: M14x2.0 (legacy record, unverified). Part number: not verified.

Steering — 2010 Dodge Ram 3500

Steering linkage fasteners on the 2010 Dodge Ram 3500. Tie Rod End Nut (Tie rod end). Torque: 60-75 ft-lbs (legacy record, unverified). Socket size: 22mm (legacy record, unverified). Thread: M14x1.5 (legacy record, unverified). Part number: not verified.

Axle / Drivetrain — 2010 Dodge Ram 3500

Axle / Drivetrain fasteners on the 2010 Dodge Ram 3500. Front Axle Hub Nut (4WD) (Front wheel hub). Torque: 160-180 ft-lbs (legacy record, unverified). Socket size: See notes (legacy record, unverified). Thread: M34x1.5 (legacy record, unverified). Part number: not verified.

Transmission — 2010 Dodge Ram 3500

Transmission fasteners on the 2010 Dodge Ram 3500. Transmission Pan Bolt (Transmission pan). Torque: 14 ft-lbs (legacy record, unverified). Socket size: 8mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2010 Dodge Ram 3500 numbers above.

Loading the interactive 2010 Dodge Ram 3500 fastener lookup with per-bolt filtering, part links, and torque tools…