2025 Honda Civic Lug Nut Torque & Bolt Specs
The 2025 Honda Civic lug nut torque is 80 ft-lbs (108 Nm), tightened with a 19mm socket on M12x1.5 studs. Torque in a star pattern in two passes (snug, then final), and re-check after the first 50–100 miles of driving. Use a calibrated torque wrench — not an impact gun — for the final pass.
Lug nut torque: 80 ft-lbs (108 Nm) · Socket size: 19mm · Thread: M12x1.5.
This page is the OEM-referenced fastener summary for the 2025 Honda Civic. Use it before any maintenance or repair job where torque values matter — brake work, wheel changes, suspension service, engine teardowns, or oil changes. Specs are pulled from manufacturer service literature, cross-checked against community data, and updated as new chassis variants become available.
Honda's lug-nut torque sits at 80 ft-lbs (108 Nm) for nearly every passenger model from 1998 onward, with an M12x1.5 thread on most cars and the larger 14mm thread on Ridgeline and Pilot. The 19mm socket Honda uses is one of the only OEM oddities in the Japanese lineup — bring a 19mm with you, not just a 21mm. Honda factory torque values for engine oil drain plugs are unusually low (29 ft-lbs on most engines) and the crush washer is single-use, so replace it every oil change.
Common fastener categories on the 2025 Honda Civic
- Wheel / lug nut torque and thread spec (covered above)
- Brake caliper bracket bolts (typically 80-130 ft-lbs) and slide/guide pins (18-35 ft-lbs)
- Engine oil drain plug torque — rarely above 30 ft-lbs; always use a new crush washer
- Transmission pan, valve cover, and intake manifold bolts (low torque, often 89-106 in-lbs)
- Suspension control arm, sway bar, tie rod end and ball joint torque
- Spark plug torque (typically 10-15 ft-lbs on aluminum heads — do not exceed)
- Differential cover bolts (RWD/4WD only) and transfer case fasteners
Repair guidance for this model year
For 2025 late-model work: Modern vehicles increasingly use aluminum body and suspension components. Aluminum fastener torque is typically 60-70% of equivalent steel torque, and aluminum threads strip easily. Use a calibrated torque wrench and apply anti-seize on any steel fastener threading into aluminum.
Tools you will need
- Metric socket set (8mm-22mm), 6-point impact-rated
- Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
- Breaker bar (24" minimum) for initial loosening
- Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
- Anti-seize on stainless or dissimilar-metal threads; thread-locker (Loctite blue) on critical reassembly
Frequently asked questions
What is the lug nut torque on a 2025 Honda Civic?
The OEM-specified lug-nut torque for the 2025 Honda Civic is 80 ft-lbs (108 Nm), using a 19mm socket on M12x1.5 thread studs. Use a calibrated torque wrench in a star pattern, in two passes (50% and 100%), and re-check after 50-100 miles of driving.
What socket size do I need for the 2025 Honda Civic lug nuts?
The 2025 Honda Civic uses a 19mm socket. A 6-point impact-rated socket is recommended over a 12-point chrome socket — 12-points round off lug nuts under impact-driver use.
Are the 2025 Honda Civic fasteners metric or SAE?
Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.
Other Honda Civic years
Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.
- 2024 Honda Civic lug nut torque
- 2023 Honda Civic lug nut torque
- 2022 Honda Civic lug nut torque
- 2021 Honda Civic lug nut torque
- 2020 Honda Civic lug nut torque
- 2019 Honda Civic lug nut torque
- 2018 Honda Civic lug nut torque
- 2017 Honda Civic lug nut torque
- 2016 Honda Civic lug nut torque
- 2015 Honda Civic lug nut torque
- 2014 Honda Civic lug nut torque
- 2013 Honda Civic lug nut torque
- 2012 Honda Civic lug nut torque
- 2011 Honda Civic lug nut torque
- 2010 Honda Civic lug nut torque
- 2009 Honda Civic lug nut torque
All 7 2025 Honda Civic fastener specs
Per-bolt torque, wrench size, and thread spec for the 2025 Honda Civic, sourced from OEM service literature and verified against community shop data. Values pair imperial (ft-lb) and metric (Nm) where the manufacturer publishes both.
Wheels — 2025 Honda Civic
Wheel and lug nut spec for the 2025 Honda Civic. For the wheel hub, plan for a 19mm tool on a M12x1.5 stud; final torque is 80 ft-lbs (108 Nm) (lug nut).
Brakes — 2025 Honda Civic
Brake fasteners on the 2025 Honda Civic — caliper bracket, slide pins, and banjo bolt torque follow. Front caliper bracket bolt tightens to 80 ft-lbs, takes a 17mm driver, runs on M12x1.25 threads, located at the front brake caliper bracket.
Engine — 2025 Honda Civic
Engine bolt-by-bolt torque for the 2025 Honda Civic, including the long block, valve covers, and intake. The oil drain plug uses a 17mm drive on a M12x1.5 thread, torqued to 33 ft-lbs at the oil pan. At the engine, the cylinder head bolt torques to Stage 1: 22 ft-lbs, Stage 2: +90°, Stage 3: +90° (14mm drive, M11x1.5 thread). For the cylinder head, plan for a 5/8" tool on a M14x1.25 stud; final torque is 13 ft-lbs (spark plug). Connecting rod bolt tightens to Stage 1: 14 ft-lbs, Stage 2: +90°, takes a 12mm driver, runs on M8x1.0 threads, located at the engine.
Drivetrain — 2025 Honda Civic
Drivetrain and driveline fasteners for the 2025 Honda Civic — axle, transmission, and differential plugs. At the front hub/spindle, the axle nut torques to 181 ft-lbs (32mm drive, M24x1.5 thread).
Loading the interactive 2025 Honda Civic fastener lookup with per-bolt filtering, part links, and torque tools…